Handlebar Switches - Yamaha BANSHEE YFZ350R Owner's Manual

EBU00053

Handlebar switches

w
1. Lights switch "LIGHTS"
2. Engine stop switch "ENG. STOP"
EBU00054
Engine stop switch "ENG. STOP"
Make sure that the engine stop switch is in the
"RUN" position. The engine stop switch con-
trols ignition and can be used at all times to
stop the engine, especially in an emergency.
The engine will not start or run when the
engine stop switch is turned to "OFF".
q
EBU01087
Light switch "LIGHTS"
Turn the switch to the "LO" position to switch
on the low beam and the tail/brake light.
Turn the switch to the "HI" position to switch
on the high beam and the tail/brake light.
Turn the switch to the "OFF" position to switch
off the headlights and the tail/brake light.
NOTE:
The headlights and the tail/brake light can be
turned on only when the engine is started.
4-2