Headlight Beam Adjustment - Yamaha BANSHEE YFZ350R Owner's Manual

4. Put a new headlight bulb into position and
secure it in place with the bulb holder.
q
1. Bulb holder cover
3. Reflector
5. Install the bulb holder cover.
cC
Make sure the bulb holder cover is secure-
ly fitted over the bulb holder and seated
against the reflector.
6. Install the headlight unit assembly.
7. Adjust the headlight beam if necessary.
w
e
2. Bulb holder
EBU01089

Headlight beam adjustment

cC
It is advisable to have a Yamaha dealer
make this adjustment.
To raise the beam, turn the adjusting screw in
direction a.
To lower the beam, turn the adjusting screw in
direction b.
1. Adjusting screw
8-43
1
a
b