Yamaha 60C Owner's Manual page 57

UP
UP
DN
DN
EMU00295
PROCEDURE FOR TILTING UP
Power tilt / Power trim/tilt model
1) Remove the fuel-line connection from
2) Push the power tilt / power trim/tilt
701034*
UP
DN
302021*
3) Turn the tilt-support lever toward you
w
After tilting the engine, be sure to sup-
port it with the tilt-support lever.
Otherwise, the engine could fall back
down suddenly if oil in the power tilt /
power trim/tilt unit should lose pressure.
403011*
Power trim/tilt model
4) Once the engine is supported with the
411014
3-20
the motor. (If the connector is provid-
ed on the motor.)
switch "UP" until the outboard has
tilted up completely.
and support the engine.
tilt-support lever, push the power
trim/tilt switch DOWN to retract the
trim rods.
E