Adjusting A Headlight Beam; Replacing The Tail/Brake Light Bulb - Yamaha GRIZZLY 125 Owner's Manual

6. Install the bulb holder by pushing it inward and
turning it clockwise.
1
7. Install the bulb holder cover.
8. Install the cover at the rear of the headlight.
2
9. Adjust the headlight beam if necessary.
3
EBU25550

Adjusting a headlight beam

4
ECB00690
CAUTION:
5
It is advisable to have a Yamaha dealer make
this adjustment.
6
To raise a headlight beam, turn the adjusting
7 screw in direction (a).
To lower a headlight beam, turn the adjusting
8
screw in direction (b).
9
10
11
1. Headlight beam adjusting screw
EBU25610

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, replace it as
follows.
1. Remove the bulb holder (together with the
bulb) by turning it counterclockwise.
8-46
(a)
(b)
1