Yamaha GRIZZLY 125 Owner's Manual page 42

1
3
2
3
4
5
6
1. Neutral "N"
2. Forward "F"
7
3. Reverse "R"
4. Drive select lever
8
3. Open the throttle lever gradually.
9
Shifting: Reverse
10
1. Bring the ATV to a complete stop.
2. Apply the parking brake.
11
3. Shift from neutral to reverse and vice versa by
moving the drive select lever along the shift
guide.
NOTE:
When in reverse, the reverse indicator light should
1
2
4
come on. If the indicator light does not come on,
have a Yamaha dealer check the electrical circuit.
4. Check behind for people or obstacles, and
then release the parking brake.
5. Open the throttle lever gradually and continue
to watch to the rear while backing.
NOTE:
If the drive select lever is shifted into reverse while
the engine is running, the engine will stop unless
the rear brake lever or parking brake is applied.
EWB00670
POTENTIAL HAZARD
Improper operation in reverse.
WHAT CAN HAPPEN
You could hit an obstacle or even a person
behind you, resulting in serious injury.
HOW TO AVOID THE HAZARD
When you shift into reverse, make sure there
are no people or obstacles behind you. When
it is safe to proceed, go slowly.
6-4
WARNING