Yamaha GRIZZLY 125 Owner's Manual page 88

Tightening torque:
1
Screw:
2 16 Nm (1.6 m·kgf, 11.6 ft·lbf)
Oil filler bolt:
3
23 Nm (2.3 m·kgf, 16.6 ft·lbf)
4
To change the transmission oil
1. Place the ATV on a level surface.
5
2. Start the engine, warm it up for several min-
utes, and then turn it off.
6
3. Place an oil pan under the transmission to col-
lect the used oil.
7
4. Remove the oil filler bolt and the drain bolt to
drain the oil from the transmission case.
8
9
10
11
1
1. Transmission oil drain bolt
5. Install the drain bolt, and then tighten it to the
specified torque.
Tightening torque:
Transmission oil drain bolt:
23 Nm (2.3 m·kgf, 16.6 ft·lbf)
6. Add the specified amount of the recommend-
ed transmission oil, and then install and tight-
en the oil filler bolt.
8-14