1
2
3
1
4
5
6
1. Measurement A
7
5. Tighten the hub stopper bolt, and then its lock-
nut.
8
EBU24880
Lubricating the drive chain
9
The drive chain must be cleaned and lubricated at
10
the intervals specified in the periodic maintenance
and lubrication chart, otherwise it will quickly wear
11
out, especially when riding in dusty or wet areas.
Service the drive chain as follows.
1. O-ring
ECB00560
CAUTION:
The drive chain must be lubricated after wash-
ing the ATV or riding in the rain.
1. Clean the drive chain with kerosene and a
small soft brush.
ECB00570
CAUTION:
To prevent damaging the O-rings, do not clean
the drive chain with steam cleaners, high-pres-
sure washers or inappropriate solvents.
2. Wipe the drive chain dry.
8-36
1