Procedure For Tilting Up (Power Trim And Tilt Models / Power Tilt Models) - Yamaha Z300 Owner's Manual

Operation
the engine by following the procedure
on page 46. Never tilt the outboard mo-
tor while the engine is running. Severe
damage from overheating can result.
Do not tilt up the engine by pushing the
G
tiller handle (if equipped) because this
could break the handle.
EMU28007
Procedure for tilting up (power trim
and tilt models / power tilt models)
1. Place the remote control lever / gear
shift lever in neutral.
N
2. Disconnect the fuel line from the out-
board motor or close the fuel cock.
3. Press the power trim and tilt switch /
power tilt switch "
board motor has tilted up completely.
50
ZMU03196
N
ZMU04588
" (up) until the out-
UP
UP
4. Push the tilt support knob into the clamp
bracket or pull the tilt support lever to-
ward you to support the engine.
ZMU04602
ZMU01954