Yamaha Z300 Owner's Manual page 35

Preoperation checks
Place the gear shift lever in neutral and turn
the main switch to "
plays come on and the total hour display
comes on, the gauge will change to normal
operation. If the buzzer sounds and the wa-
ter separator warning indicator blinks, con-
sult your Yamaha dealer immediately.
NOTE:
To stop the buzzer, press the "
" " (mode) button.
Oil level warning
When the oil level is low while cruising, the
oil level warning indicator will start to blink.
The engine speed will automatically de-
crease to about 2000 r/min.
When the buzzer sounds and the oil level
warning indicator blinks, check the oil level
and add the oil if necessary. If the warning
device has activated while the appropriate
" (on). After all the dis-
" (set) or
ZMU05419
ZMU05420
Basic components
engine oil level is maintained, consult your
Yamaha dealer.
ECM01580
CAUTION:
Do not continue to run the engine if the oil
level warning device has activated. Seri-
ous engine damage will occur.
Overheat warning
If the engine temperature rises too high while
cruising, the overheat warning indicator will
start to blink. The engine speed will automat-
ically decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the overheat warning device has
activated. Check the cooling water inlet for
clogging.
ECM01590
CAUTION:
Do not continue to run the engine if the
G
overheat warning indicator blinks. Seri-
ZMU05421
ZMU05422
29