Yamaha VX150A Owner's Manual page 68

E
cC
Do not use the tilt support lever/knob
when trailering the boat. The outboard
motor could shake loose from the tilt
support and fall. If the motor can not be
trailered in the down position, use an
additional support device to secure it in
the up position.
EMU00332
STORING OUTBOARD MOTOR
When storing your Yamaha outboard for
prolonged periods of time, (2 months or
longer), several important procedures
must be performed to prevent expensive
damage. This is especially important for
your Precision Blend equipped outboard
due to the lean oil ratios used at idle prior
to shutting the engine off for the season.
It is advisable to have your outboard ser-
viced by an authorized Yamaha dealer
prior to storage. However, the following
procedures can be performed by you, the
owner, with a minimum of tools.
cC
Do not use any chemical goods contain-
ing Silicon, Phosphorus or Lead.
Otherwise, the oxygen sensor for
Electronic Fuel Injection system could be
damaged. For the detail, consult your
Yamaha dealer to use chemical goods for
storage.
4-3