Yamaha VX150A Owner's Manual page 32

w
YAMAHA
SPEED
TRIP TIME
set
q
e
802023*
Km/h
knot
mph
km
mile
BATT
mode
802024*
EMU00141
Speedometer
The meter will show the boat speed.
NOTE:
The speedometer displays km/h, mph, or
knots, depending upon operator prefer-
ence. Select the desired unit of measure-
ment by setting the selector switch on the
back of the meter. See the illustration for
setting.
1 Cap
2 Selector switch (For speed unit)
3 Selector switch (For fuel sender)
EMU01274
Trip Meter
This meter displays the distance the boat
has traveled since the meter was last
reset.
Repeatedly push and release the "mode"
button until the indicator on the face of
the meter points to "TRIP". To reset the
trip meter to "0", press the "set" and
"mode" button together.
NOTE:
8 The trip distance is shown in kilometers
or miles depending upon the unit of
measurement
speedometer.
8 The trip distance is kept in memory by
battery power. The stored data will be
lost if the battery is disconnected.
2-11
E
selected for the