Yamaha VX150A Owner's Manual page 35

YAMAHA
FUEL MANAGEMENT
P S
TTL ECON SYNC
set mode
ON
1 2 3 4 5
q
FUEL MANAGEMENT
P S
TTL ECON SYNC
EMU00147
Fuel Flow Meter
The meter displays fuel flow within one
hour, at the rate of current engine opera-
tion.
I/h
gph
If twin engines are installed on your boat,
the meter will display total fuel flow of
Port and Starboard side engine. It also
displays PS indication at the same time.
By pressing "set" button, the meter will
display fuel flow of starboard side engine
and S indication.
By pressing "set" button again, the meter
will display fuel flow of port side engine
6
and P indication.
By pressing "set" button again, the meter
will display total fuel flow.
l/h
(liter)
NOTE:
gph
8 The meter displays gallon/hour and liter
(gallon)
8 Fuel consumption meter and Fuel econ-
EMU01276
Fuel Consumption Meter
This meter displays the total amount of
fuel consumed since the meter was last
I/h
reset.
gph
Repeatedly push and release the "mode"
Km /L
button until the indicator on the face of
mp
g
the meter points to total ("TTL"). To reset
the total fuel consumption to "0", press
the "set" and "mode" buttons together.
2-14
depending upon operator preference.
Select the desired unit of measurement
by setting the selector switch 1 on the
back of the meter during installation.
omy meter will indicate same unit of
measurement.
E