Yamaha MAJESTY 400 Owner's Manual page 63

Cleaning the V-belt case air filter el-
ement
1. Remove cowling
page 6-8.)
2. Remove panel B. (See page 6-8.)
3. Remove the V-belt air filter case
cover by removing the screws.
1(×5)
2
1
1
1. Screw
2. V-belt air filter case cover
4. Remove the V-belt case air filter
element by removing the screws.
PERIODIC MAINTENANCE AND MINOR REPAIR
1
(×4)
E. (See
2
1. Screw
2. V-belt case air filter element
5. Lightly tap the V-belt case air filter
element to remove most of the
dust and dirt, and then blow out the
dirt with compressed air as shown.
6. Check the V-belt case air filter ele-
ment for damage and replace it if
1
CAUTION:
Make sure that the V-belt filter ele-
ment is properly seated in its case.
10. Install the cowling.
6-22
necessary.
7. Install the V-belt case air filter ele-
ment by installing the screws.
8. Install the V-belt air filter case cov-
er by installing the screws.
9. Install the panel.
ECA12940
2
3
4
5
6
7
8
9