2. Install the screw access cover by
placing it in its original position.
3. Install the grab bar by installing the
collars and grab bar bolts.
Tightening torque:
Grab bar bolt:
23 Nm (2.3 m·kgf, 16.6 ft·lbf)
4. Install the passenger seat.
5. Install cowlings A and B.
Cowling E
To remove the cowling
1. Pull up the left floorboard mats as
shown.
PERIODIC MAINTENANCE AND MINOR REPAIR
1
1. Left floorboard mat
2. Remove the cowling screws.
1
(×4)
1. Screw
3. Pull the cowling down slightly, and
then pull it outward as shown.
6-10
1
1. Cowling E
To install the cowling
1. Insert the tabs on the cowling into
the slots as shown, and then install
the screws.
1
1
(×13)
1. Tab
2. Place the left floorboard mats in
the original position.
2
3
4
5
6
7
8
9