Replacing A Turn Signal Light Bulb Or The Tail/Brake Light Bulb - Yamaha VMAX VMX12P Owner's Manual

1. Screw (× 2)
Replacing a turn signal light
bulb or the tail/brake light
bulb
1. Remove the lens by removing the
screws.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Tail/brake light bulb (× 2)
2. Remove the defective bulb by
EAU00855
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
1. Turn signal light bulb
4. Install the lens by installing the
CAUTION:
@
Do not overtighten the screws, oth-
erwise the lens may break.
@
6-42
screws.
EC000108
6