Westinghouse SB926 User Manual page 8

117994710 10042007.qxp
8 control panel
Button Lock option
Close the door.
Press the POWER button.
Press the program Button to select a
program.
Press the Delay button if needed.
Press the START button to start the
cycle.
To activate the Button LOCK function,
press the START button for 5
seconds, the button lock light blinks
for 15 seconds, then when it is
permanently on, it indicates the key
lock is active. The button lock key
stops anyone from changing the
selected program.
Button Lock
Rinse aid
The rinse aid indicator light is
never illuminated while a washing
program is running even if filling
with rinse aid is necessary.
4/10/2007 3:04 PM
Indicator lights
Flashes for 15 seconds when the
START/Button LOCK is pressed for 5 seconds.
Illuminates when the function Button lock is
activated.
Illuminates when the rinse aid has run out.
Pagina 8
If any button is pressed, an audible
signal indicates that the key lock
funtion is active.
To cancel the selected program and
select a new one, reset the
dishwasher by:
- pressing the START button for 5
seconds (the keylock light blinks for
15 seconds)
- press and hold simultaneously
Program and DELAY START
buttons (CANCEL) until the program
light indicator switches off, then the
program has been cancelled and
the key lock deactivated and a new
program can be selected.
The button LOCK option is
automatically deactivated at the end
of the selected program by switching
OFF the dishwasher or opening and
closing the door.
Setting mode
To cancel a set program or a
program in progress
Simultaneously press and hold the
two program buttons positioned over
the word Cancel, until only the
POWER light is on. The program has
been cancelled and the machine is
now in setting mode.