Table of Contents
Advertisement
6.1 3D sound Effect
This function outputs 3D effects on the stereo audio analog output. 3D effects are broken down into
4 surround modes.
1 Press 3D SOUND button
3D SOUND MODE 1 is displayed on TV screen. And analog stereo output is changed to surround
mode 1.
3D SOUND MODE1
2 Press 3D SOUND button again
Press the 3D SOUND button continuously until the desired 3D sound mode is selected.
3D SOUND MODE2
6.2 Repeat selected segment
Use this function to repeat the play of a selected segment. This is very useful for studying foreign
languages because it repeats the selected segment until canceled.
1 Press A-B button
Press A-B button at the point of where repeat play is to start. A TO B SET A and A-
displayed, followed by A- indicator on FL display turning on, and the starting point of your selected
segment is set up.
2 Press A-B button again
Press A-B button at the point of where repeat play is to end. While A TO B SET B and A-B are
displayed again and A-B indicator on FL display is turned on, the ending point is set up and PLAY
starts from the A point right away.
3 Press A-B button once more
Press A-B button one more time to cancel the repeat play. A TO B CANCELLED and
displayed on TV screen.
A TO B SET A
3D SOUND MODE3
A TO B SET B
3D SOUND MODE4
A TO B CANCELLED
30
NORMAL
are
-
are
Advertisement
Table of Contents
