Table of Contents
Advertisement
Digest – DISC
5 Press the desired screen number
If you press the desired number of small screen, it starts playing from the position where the small
screen begins. You don't need to press the SELECT button.
6.7 MARKER (DVD, VCD with PBC off, Audio CD)
This function is to move to the desired location fast and easily during play by storing up to 5 markers in
advance.
1 Press MARKER button during play mode
When MARKER button is pressed during play, the screen is displayed as shown the figure below.
2 Storing marker
Go to the desired marker point using arrow buttons and press the SELECT button to store the
data to be viewed. V will be marked at the selected point.
3 Repeat storing marker as you want
By repeating the above 2 steps, you may store a maximum of 5 markers.
4 Choose stored marker
To play the marker point, press the MARKER button and select the desired marker using arrow
buttons.
5 Deleting stored marker
To cancel the marker function, press up, down or CLEAR button at the marker you want to delete
Marker Initial Screen
6.8 Display
The unit features On-Screen Menu icons showing disc information such as TITLE and CHAPTER for
DVD, TRACK for VCD, and TIME or Bit Rate (DVD only) during play. There are 7 sub functions for
DVD, 5 sub functions for VCD or Audio CD. DVD sub functions are TITLE/CHAPTER search, TIME
SEARCH, TITLE ELAPSED, TITLE REMAIN, CHAPTER ELAPSED, CHAPTER REMAIN, BIT
RATE METER. VCD sub functions are TRACK/TIME search, SINGLE ELAPSED, SINGLE REMAIN,
TOTAL ELAPSED and TOTAL REMAIN.
6.8.1 Display function for DVD
1 Perform TITLE and CHAPTER search
When the DISPLAY button is pressed during play. TITLE and CHAPTER information are displayed as
shown in the figure below. For TITLE search, Enter the number of your desired title number using
numeric buttons and then press the SELECT button or adjust title number using up and down
Digest - TRACK
1 Marker Stored
34
Advertisement
Table of Contents
