Setup Function; Using The Basic Function; Open/Close Disc Tray - VIETA DVD-2 Instruction Manual

2 MENU (6)
Used to display the contents menu of the loaded DVD disc. This function is disc dependent. A DVD
disc may not contain a contents menu. See 5.5 for more information.
3 (ANGLE (19))
Used to select a different angle when the loaded DVD disc supports multiple angles. This function is a
disc dependent. Many DVD discs don't support multiple angles. See 5.12 for more information.
4 SUB-T(SUBTITLE (20))
Used to change the subtitle language to a different language or off from the one selected at the initial
settings, when the loaded disc supports multiple languages. See 5.11 for more information.
5 AUDIO (21)
Used to change the audio language to a different language from the one selected at the initial settings,
when the loaded disc supports multiple audio languages. See 5.10 for more information.

4.5 SETUP Function

▲/▼
1 ARROW (11, / /
Used to move to the desired menu and moves the image center of an enlarged screen in zoom mode.
Also can be used in marker or display function.
2 SEL(SELECT (10))
Used to select the menu item. When pressed during STOP, PAUSE, STEP, SEARCH or SLOW state,
it also cancels the current state and converts to PLAY mode.
3
Sets up the various operation information of this unit to customize DVD performance. See 7 for more
information.
5. Using Basic Function

5.1 Open/Close Disc Tray

1 Connect to AC power
When AC power is connected, the STAND-BY LED on the front panel is turned on.
)
SETUP
21
(14)