Table of Contents
Advertisement
buttons and press the SELECT button at the TITLE column. For Chapter search, Adjust chapter
number in the same manner as for title search.
2 Perform TIME SEARCH
When the DISPLAY button is pressed twice during play, TIME SEARCH sub function is activated.
After entering the time you want to jump, press the SELECT button. If you want to go to 0:01:23 (0
hour, 1 min, 23 sec) press the numeric buttons in this order (0, 0, 1, 2, 3) then press the SELECT
button. The time you want to enter should be in the title boundary. After you press the SELECT
button, it starts playing from the time entered, if valid.
3 Viewing time information
When the DISPLAY button is pressed three times during play, title elapsed time information is
displayed on top of TV screen at the left corner. When the DISPLAY button is pressed again title
remain time information is displayed. If pressed again, CHAPTER elapsed time information is
displayed. Pressing the DISPLAY button once more activates CHAPTER remain time information.
Finally, another press of the DISPLAY button displays the Bit Rate Meter.
4 Displaying Off
Press DISPLAY button when Bit Rate Meter is activated.
Chapter/Title Search
Title Remain
Chapter Elapsed
6.8.2 Display function for VCD (PBC off only)
1 Perform TRACK search
When the DISPLAY button is pressed during play TRACK information and TIME search is
displayed as shown in the figure below. For TRACK search, enter the number of your desired
track using numeric buttons and then press the SELECT button or adjust track number using up
and down buttons and press the SELECT button at the TITLE column.
2 Perform TIME search
After entering the time you want to jump, press the SELECT button. If you want to go to 01:23 (1
min, 23 sec), press the numeric buttons in this order (0, 1, 2, 3) and press the SELECT button.
The time you want to enter should be in this current track boundary. After you press the SELECT
button, it starts playing from the time entered if valid.
3 Viewing time information
When the DISPLAY button is pressed twice during play, track (single) elapsed time information is
displayed on the top of the TV screen at the left corner. When the DISPLAY button is pressed
again, a track (single) remain time information is displayed on the screen. If pressed again, disc
(total) elapsed time information is displayed on the screen. And next DISPLAY button activates
disc (total) remain time information. Finally, another press of the DISPLAY button quits the display
function.
4 Display Off
Time Search
Chapter Remain
35
Title Elapsed
Bit Rate Meter
Advertisement
Table of Contents
