Table of Contents

Advertisement

3 TV TYPE
Set up TV type according to type supported by your TV or monitor. When you select MULTI, the
output video type is dependent on the disc loaded. If the recorded video type is PAL then it
outputs PAL. If NTSC then NTSC.
4 SCART
Achieving the clearer and higher definition picture than the normal composite output can be done
by selecting RGB. If you want to see the picture in RGB, choose RGB and connect to the TV set
using SCART connector. To make correct connection, refer to basic connection page for
connecting. N.B. When RGB selected, S-Video (YC) will not come out. On the contrary RGB will
not come out when COMPOSITE selected. Set to COMPOSITE to view in S-Video (YC) via SVHS
output terminal.
5 CAPTIONS (NTSC only)
CLOSED CAPTION was invented for hearing impaired person. But it is very useful when learning
foreign languages. If your TV supports closed caption, select ON. If not, closed caption won't be
displayed.

7.3 Other

If you select OTHER, OTHER's sub item is displayed as shown in the figure below. The sub item of
OTHER is related to system control on various subjects.
1 ANGLE MARK (Valid for DVD only)
It is possible to have 9 different angles on a DVD disc. This selects whether to display
(On Screen Display) showing multi-angle on the TV screen or not, when playing DVD disc
supporting multiple angles. If you select ON, you can see the
detected while playing.
2 SCREEN SAVER
If a bright picture does not move for a long time, the TV may be damaged. If on longer than 5
minutes, the screen saver works when ON is selected. The screen saver protects the CRT
(Cathode Ray Tube) from damage by displaying a moving DVD logo continuously on the screen.
3 FLT DISPLAY
39
OSD
OSD when multi-angle is

Advertisement

Table of Contents
loading

Table of Contents