VIETA VNT7800BT Owner's Manual page 9

INSTALLATION
DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan or Toyota,
follow these mounting instructions.
Use the screw holes marked T (Toyota),
or N (Nissan) located on both sides of
the unit to fasten the unit to the factory
radio mounting brackets supplied with
your vehicle.
Factory Radio
Mounting Bracket
Screw
Hook
To fasten the unit to the factory radio
mounting brackets.
Align the screw holes on the bracket with
the screw holes on the unit, and then
tighten the screws (5x5mm) on each
side.
Note:
The outer trim ring, sleeve and the metal
strap are not used for method B
installation.
Side View showing
Screw Holes marked
T, N or S
Screw
Dashboard or Console
9