VIETA VNT7800BT Owner's Manual page 12

LOCATIONS AND FUNCTION OF THE PLAYER
1. OPEN: Press to draw out the monitor, when the monitor drawing out, press it to turn down the
monitor and draw in.
2. BAND: Press it shortly to select radio band mode.
3. Disc Slot: Insert the disc into the disc slot to enter into DISC mode.
4. : Press to answer the call or make a call in BT mode.
5. : Press to hang up the call.
6. Volume knob/push SEL button: Repeatedly press to select the audio mode to adjust, such as
VOL, BAS, TRE, BAL, FAD.
Rotate the knob to increase/decrease the volume level.
7. Remote sensor (IR): Receive signal from the remote control to control the unit.
8. : In power off status, press it to turn the unit on. Press it for several seconds to turn off
the unit. When the unit is on, press shortly to mute the sound, press it again to resume the
sound.
9. SRC: In normal working status, press it to select the desired source mode, such as DISC,
RADIO, AV IN, SD/USB... etc.
10. TA/AF: Press it shortly to switch AF on or off. Hold press it to switch TA on or off.
11. /PTY: press it shortly to play/pause the playback. Hold press it to select the PTY program.
12&13. / : When the monitor is drawing in, press to seek the radio stations, select the track
backward/forward, how to operation please refer to the contents below.
When the monitor is drawing out, press the two buttons (TILT up/down) to adjust
the monitor angle.
14. : Press to eject the disc that in the disc slot of the unit.
15. Release button: press to remove the button panel.
16. Reset button.
17. USB interface: Provide the interface for USB player.
18. AV IN jack: You can connect another audio/video system to the unit from this jack.
19. LCD: Display the current information on the display.
20. MIC: Microphone (for Bluetooth operation).
21. SD/MMC card interface.
12