Problems and actions needed
Problems and actions needed
Never attempt any repairs or work on the cooker which could cause injury or damage the product. If you cannot
solve the problem after checking the list below, contact a service company approved by the supplier.
Problem
The cooker has no electrical supply
The rear left hotplate is not working
(230-volt cooker only).
Boiling/frying takes a long time.
The oven light is not working
The door safety catch isn't working
At the end of the cooker's life
22
Action needed
Check that:
•
THE FUSE
•
THE PLUG
•
THE RCD
The cooker has an electrical inter-lock so that the rear left
hotplate cannot heat while the oven Swift Start function is on.
This hotplate can be used as soon as the oven Swift Start heat-
ing is finished.
Check you have a suitable pan that conducts heat properly (see
"Choice of saucepan/frying pan" page 10)
Replace broken bulb (see "Changing oven light bulb"
page 17)
Activate the door safety catch (see "The door safety catch" on
page 6)
Disconnect the cooker from the electrical supply.
1
Cut off the electrical lead, as close as possible to
2
the rear of the cooker.
Make sure that the oven door safety catch has been
3
deactivated, to remove the risk of children locking
themselves inside the oven.
Contact your local council to find out where you can
dispose of your cooker.
(
) has not gone
S
is pushed in correctly
(if fitted) has not tripped