Table of Contents
Advertisement
Something not working
If the appliance is not working correctly, please carry out the following checks, before contacting your local
Service Centre.
SYMPTOM
The oven does not come on.
The oven light does not come on.
It takes too long to finish the dishes, or they are
cooked too fast.
Steam and condensation settle on the food and the
oven cavity.
The timer does not work.
The oven fan is noisy.
Error code "E40" appears on the control panel.
An error code other than "E40" appears on the
control panel.
Service and Spare Parts
If after the checks listed in the previous chapter, the
appliance still does not work correctly, contact your
locals Service Centre, specifying the type of
malfunctioning, the appliance model (Mod.), the product
number (Prod. No.) and the serial number (Ser. No.)
marked on the identification plate.
This plate is placed on the front external edge of the oven
cavity (see Fig. 34).
Original spareparts, certified by the product
manufacturer and carrying this symbol are only available
at our Service Centre and authorized spareparts shops.
20
SOLUTION
Switch on the oven using push button
a cooking function.
Check the fuse and ensure the socket switch or the
switch from the mains supply to the oven are ON.
Set the time of day (see chapter "To set the correct
time of day")
Switch on the oven using push button
Check the light bulb, and replace it if necessary (see
"Replacing the Oven Light")
The temperature may need adjusting
Refer to the cooking function sections and to any
cooking chart provided
Leave dishes inside the oven no longer than 15-20
minutes after the cooking is completed.
Check the instructions for the timer.
Check that shelves and bakeware are not vibrating in
contact with the oven back panel.
Switch the appliance off and leave it to cool down.
Push button
to switch on the appliance.
Take note of the error code and contact an authorised
Service Centre.
, then select
.
Fig. 34
Advertisement
Table of Contents
