The Hinged Grill - Zanussi ZOU 662 Q Instruction Booklet

Models in stainless steel or aluminium:
We recommed to clean the oven door using
only a wet sponge and dry it up after cleaning
with a soft cloth.
Never use steel wool, acids or abrasive
products as they can damage the oven
surface.
Clean the oven control panel following the
same precautions.
Oven door cleaning
For a better cleansing of the oven door, you
are suggested to remove it from the appliance
with the following procedure:
- open tho door completely; lift the small
levers placed on the two hinges and turn
the levers towards the inside (Fig. 6).
- Slowly close the oven door, until it
touches the two levers,
- then push it towards the oven and
remove it by pulling it towards the
outside.
- Place the door on a horizontal level.
After cleaning, assemble the door again
by carrying out the procedure described
above backwards. When the two small
levers are placed again on the hinges, the
door will have been accurately fit.
FO 0452
Fig. 6

The Hinged Grill

Some models are fitted with a hinged grill
element, to enable you to clean the roof of
the oven easily.
Before proceeding ensure the
oven is cool and is isolated from
the electricity supply.
Undo the screws which hold the grill in
place (see Fig. 7). When doing this
operation for the first time, we
recommend using a screwdriver.
Then gently pull the grill downward to
allow access to the oven roof.
Clean the oven roof with a suitable
cleaner and wipe dry before replacing the
hinged grill element.
Gently push up the grill element into
place and firmly screw into place the
holding nuts.
Ensure the grill holding nuts are
firmly in place to avoid the grill
falling down when in use.
Fig. 7
27