Stopping - TOHATSU MFS 9.8A3 Owner's Manual

Tohatsu outboards
Hide thumbs Also See for MFS 9.8A3:
Table of Contents

Advertisement

4. Stopping

MF, EF and EFT type
Stop switch
Stop Switch Lock
Turn the throttle grip to the slow
position.
Put the shift lever in the Neutral
position.
Run the engine for 2-3 minutes at
idling speed if it has been running
at full speed.
Push the stop switch to stop the
engine or release the stop switch
lock.
�������
!
Do not shift into Reverse during
planing, or control will be lost leading
to serious personal injury, boat
may swamp, and/or hull may be
damaged.
Do not shift into Reverse during
cruising, or control may be lost,
falling down or causing passenger(s)
to be thrown overboard. Leading to
serious personal injury, and steering
system and/or shifting mechanism
may be damaged.
ENGINE OPERATION
EP and EPT type
OFF
Stop switch lock
(N)
Put the shift lever in the Neutral
position and run the engine for 2-3
minutes at idling speed if it has
been running at full speed.
Turn the main switch key to the
OFF position.
Notes
After stopping the engine, close the
air vent screw on the tank cap.
Disconnect the fuel connector of
the engine or the fuel tank.
Disconnect the battery cord of the
EF, EP, EFT or EPT type engine, if the
engine will not be used for more than
3 days.
33
ON
START
10
11
12
13
1
2
3
4
5
6
7
8
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents