TOHATSU MFS 9.8A3 Owner's Manual page 36

36
ENGINE OPERATION
MF, EF type
Stop the engine.
Shift the outboard into neutral.
1 Raise the engine to the tilt up position.
Change the thrust rod position.
Gentry lower the outboard.
2
3
4
5
6
Higher
7
EP type
Stop the engine.
Shift the outboard into forward.
8
Raise the engine to the tilt release
position(b).
9
Change the preset knob position.
Gently lower the outboard.
10
11
12
Preset Knob
13
14
Thrust Rod
Lower
a
Transom angle settings
Tilt release position
b
�������
!
Do not put hand or finger in between
outboard motor body and clamp
bracket when adjusting trim angle to
prevent injury in case the outboard
motor body falls.
Unsuitable trim position can cause
loss of control of boat.
When testing a trim position, run
boat slow initially to see if it can be
controlled safely.