Page 1 User’s Guide If you need assistance: ❖ InTouch Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see guide. TOSHIBA 1955 Series ® ® Center Chapter 9 page 186 in this...
Page 2 ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM. WHEN COPYING OR TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED.
Page 3: Fcc Notice
: Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's or expansion unit's serial port, parallel port, monitor port, USB port, ®...
Page 4: Type Of Service
Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.
Page 5: If Problems Arise
FCC. In the event repairs are ever needed on your modem, they should be performed by Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba.
Page 6: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 7: Wireless Lan And Your Health
If you should experience any such problem, immediately turn off either one of your Bluetooth™ or WirelessLAN. Please contact Toshiba PC product support on web site http://www.toshiba- europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the United States for more information.
Page 8: Regulatory Information
Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9 België/ For outdoor usage only channel 10 (2457 MHz) and 11 (2462 MHz) is Belgique: allowed. For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 10 Caution: Exposure to Radio Frequency Radiation The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas. The both of antenna types, when installed are located at the upper edge of the LCD screen.
Page 11 conjunction with any other antenna or transmitter. Antenna(s) used in 5.15- 5.25GHz frequency band must be integral antenna which provide no access to the end user. Refer to the Regulatory Statements as identified in the documentation that comes with those products for additional information. Relevant transmitters include FCC IDs: CJ6UPA3233WL, CJ6UPA3232BT.
Page 12 The interference range of this equipment is less than 40m. This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100...
Page 13: Device Authorization
❖ Consult the dealer or an experienced radio/TV technician for help. Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and...
Page 14 Caution: Do not use this equipment except in the countries in Fig.1. Caution: Bluetooth and Exposure to Radio Frequency Radiation The radiated output power of the Bluetooth™ Card from Toshiba is far below FCC radio frequency exposure limits. Nevertheless, the Bluetooth card shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 15 This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 16 INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL.
Page 17: Table Of Contents
Contents Introduction ...25 This guide ... 25 Safety icons ... 26 Other icons used... 27 Other documentation ... 27 Service options ... 28 Chapter 1: Finding Your Way Around ... 29 Making sure you have everything ... 29 Front with the display closed ... 30 Back ...
Page 18 Keeping yourself comfortable ... 42 Precautions... 45 Setting up your computer ... 47 Setting up your software... 47 Registering your computer with Toshiba ... 48 Adding external devices ... 49 Connecting the AC adapter... 50 Charging the battery ... 52 Using the computer for the first time ...
Page 19 Chapter 3: Learning the Basics... 71 Computing tips ... 71 Using the keyboard ... 72 Character keys ... 73 Ctrl, Fn, and Alt keys ... 74 Function keys... 74 Windows Overlay keys... 75 Starting a program... 76 Saving your work ... 77 Printing your work ...
Page 20 Going into Standby mode more quickly ... 100 Toshiba’s online resources... 101 Chapter 4: Mobile Computing ... 102 Toshiba’s energy-saver design ... 102 Running the computer on battery power ... 102 Battery Notice ... 103 Using additional batteries ... 103 Charging batteries...
Page 21 Lesson 4: Creating a new document ... 124 Lesson 5: Creating a new folder... 125 Lesson 6: Starting programs ... 126 Lesson 7: Resizing, repositioning, and hiding windows ... 129 Using the taskbar ... 130 Minimizing and maximizing windows ... 130 Resizing and moving windows...
Page 22 PC Card supporting software ... 167 Inserting PC Cards ... 168 Removing PC Cards ... 169 Hot swapping... 170 Chapter 7: Toshiba Utilities ... 171 Power Management ... 172 Chapter 8: WinDVD™... 174 Playing DVDs ... 174 Using the WinDVD slider bar (location) ... 176 Using the WinDVD control panel...
Page 23 Using the control panel playback buttons ... 177 Maximizing the video window ... 181 Using WinDVD Advanced Features ... 181 Using playlists ... 182 Creating a Playlist ... 182 Playing a Playlist... 184 Getting Help ... 185 Exiting WinDVD ... 185 Chapter 9: If Something Goes Wrong ...
Page 24 Contents Before you call ... 218 Contacting Toshiba ... 218 Other Toshiba Internet Web sites ... 219 Toshiba’s worldwide offices ... 220 Appendix A: Hot Keys ... 223 Volume Mute... 223 Instant password security... 224 Without a password ... 224 With a password ...
Page 25: Introduction
Introduction Welcome to the world of powerful and portable multimedia computers! With your new Toshiba notebook computer, your access to information can accompany you wherever you go. You will find that your Microsoft system is already installed on your computer. It offers exciting features and easy Internet access.
Page 26: Safety Icons
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: DANGER: This icon indicates the existence of a hazard that could result in death or serious bodily injury if the safety instruction is...
Page 27: Other Icons Used
❖ Guides for other programs that may come preinstalled on your computer for additional programs on your Recovery CDs. ❖ For accessory information, visit Toshiba’s web site at toshiba.com. ❖ The Microsoft which explains the features of the operating system.
Page 28: Service Options
Introduction Service options Service options Toshiba offers a full line of service options built around its ® SelectServ warranty programs. For more information, visit Toshiba’s Web site at If you have a problem or need to contact Toshiba, see Something Goes Wrong” on page toshiba.com.
Page 29: Chapter 1: Finding Your Way Around
Chapter 1 Finding Your Way Around This chapter presents a “grand tour” of the exterior features of your notebook computer. It serves as a reference when you need to locate parts of the computer. Making sure you have everything Before doing anything else, consult the Quick Start card provided with your system to make sure you received everything.
Page 30: Front With The Display Closed
Finding Your Way Around Front with the display closed Front with the display closed *functional only on systems with wireless module installed The display latch keeps the display panel closed and locked. To open the display panel, slide the display latch to the right and raise the panel.
Page 31 The LAN port enables you to connect the computer to a local Ether area network using a 10/100 Ethernet link. The modem port enables you use a RJ11 telephone cable to connect the modem directly to a standard telephone line. For more information, see ®...
Page 32: Right Side
Finding Your Way Around Right side Right side Microphone jack Volume control dial Headphone jack The 3.5 mm headphone jack lets you connect stereo headphones or other audio-output devices, such as external speakers. Connecting headphones or other devices to this jack automatically disables the internal speakers.
Page 33: Left Side
CAUTION: Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. Instead, use a slim object such as a straightened paper clip. Left side Keyboard release Cooling vents The cooling vents prevent the computer’s central processing unit (CPU) from overheating so that it can continue to perform at its maximum speed.
Page 34: Front With The Display Open
Finding Your Way Around Front with the display open Front with the display open Speaker Function keys TouchPad Primary control button Secondary control button The power button turns the computer on and off. The stereo speakers let you hear sounds, such as system alarms associated with your software, and music from DVD-ROMs and audio CDs.
Page 35 Finding Your Way Around Front with the display open For more information on Primary and Secondary control buttons, see “Using the TouchPad™” on page The CD/DVD control buttons allow you to play audio CDs when the computer is turned off. You can also use them to play CDs and DVDs with the computer turned on.
Page 36: Keyboard Indicator Panel
Finding Your Way Around Front with the display open Keyboard indicator panel Numeric mode light Cursor control mode light Caps lock light The numeric mode light glows when the numeric overlay is on. When this light is on, pressing an overlay key types the number printed on the front of the key instead of typing the letter printed on the top of the key.
Page 37: System Indicator Panel
Finding Your Way Around Front with the display open System indicator panel AC power light On/off light Wireless Battery light indicator light Hard disk drive light Disc/disk activity light The system indicator lights are under a tinted panel and are visible only when the feature they represent is either on, or both on and active.
Page 38: Cd/Dvd Control Buttons
Finding Your Way Around Front with the display open CAUTION: Never turn off the computer while any drive is in use. Doing so could damage the media in use and result in loss of data. CD/DVD control buttons The control buttons near the display latch are for playing CDs and DVDs.
Page 39: Underside
The next track button causes the disc player to skip to the following track on the disc. NOTE: If you have set a password for logging onto your system, your computer starts up and you need to log on before being able to play a CD or DVD.
Page 40 Finding Your Way Around Underside The cooling vent helps keep your computer at an optimum temperature. CAUTION: To prevent possible overheating of the CPU, make sure you do not block the cooling vents. The battery pack lets you use your computer when a standard electrical outlet is not available.
Page 41: Chapter 2: Getting Started
Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 42: Keeping Yourself Comfortable
AC power source, and let it dry out completely before turning it on again. If the computer does not operate correctly after you turn it back on, contact a Toshiba authorized service provider. Keeping yourself comfortable Strain and stress injuries are becoming more common as people spend more time using their computers.
Page 43 ❖ If you are using an external monitor, the top of the display should be no higher than eye level. ❖ If you use a paper holder, set it at about the same height and distance as the screen. Seating and posture When using your computer, maintain good posture with your body relaxed and your weight distributed evenly.
Page 44 Getting Started Selecting a place to work ❖ Adjust the back of your chair so that it supports the lower curve of your spine. If necessary, use a cushion to provide extra back support. Lower-back-support cushions are available at many office supply stores. ❖...
Page 45: Precautions
Work habits The key to avoiding discomfort or injury from strain is to vary your activities. If possible, schedule a variety of tasks into your working day. Finding ways to break up the routine can reduce stress and improve your efficiency. ❖...
Page 46 Getting Started Selecting a place to work ❖ Some PC Cards can become hot with prolonged use. If two cards are installed, both can become hot even if only one is being used. Overheating of a PC Card can result in errors or instability in its operation.
Page 47: Setting Up Your Computer
Local Area Network. A window will display asking if you wish to register with Toshiba and Microsoft. Setting up your computer “Connecting the AC adapter” on page Getting Started...
Page 48: Registering Your Computer With Toshiba
Setting up your computer Click Yes to register, or No to exit the process. NOTE: If you click No, you may register with Toshiba by clicking the Register with Toshiba icon on the desktop. Enter your personal information in the registration window.
Page 49: Adding External Devices
Adding external devices NOTE: Before adding external devices, Toshiba recommends setting up your software first. See page Before starting to use your computer, you may also want to: ❖ Add more memory (see (optional)” on page ❖ Connect a full-size keyboard (see keyboard”...
Page 50: Connecting The Ac Adapter
CAUTION: Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter.
Page 51 Connecting the power cable to the AC adapter Plug the AC adapter into the DC-IN jack on the back of the computer. Connecting the adapter to the computer Connect the power cable to a live electrical outlet. The AC power and battery lights glow. Getting Started Connecting the AC adapter...
Page 52: Charging The Battery
Doing so can cause an electric shock. CAUTION: Using the wrong AC adapter could damage your computer. Toshiba assumes no liability for any damage in such cases. Never pull directly on the power cable to unplug it. Hold the power plug when removing the cable from the outlet.
Page 53: Using The Computer For The First Time
CAUTION: Once the battery is charged for the first time, avoid leaving the computer plugged in and turned off for more than a few hours at a time. Continuing to charge a fully charged battery can damage the battery. Using the computer for the first time Opening the display panel Slide the display latch to the right and lift the display panel Opening the display panel...
Page 54 Getting Started Using the computer for the first time Turn on the computer by pressing the power button located above the keyboard. Pressing the power button NOTE: When you turn on the computer for the first time, don’t turn off the power again until the operating system has loaded completely.
Page 55: Using The Touchpad
Using the TouchPad™ The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you’d like to move the cursor: ❖...
Page 56: Disabling Or Enabling The Touchpad
Getting Started Using the computer for the first time left one and corresponds to the left mouse button. To double- click, press the primary button twice in rapid succession. The function of the secondary button depends on the program you are using. It usually corresponds to the right mouse button.
Page 57: Setting Up Other Devices
Setting up other devices Installing additional memory (optional) Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data. Your computer is equipped with two memory slots, which are available for you to add additional memory modules of either 128, 256, and 512 MB capacity.
Page 58 Getting Started Setting up other devices Close the display panel and turn the computer upside down to locate the expansion memory slot cover to the empty memory slots. Base of the computer Using a standard Phillips no. 1 screwdriver, unscrew the four screws that secure the memory slot cover, and then remove the memory slot cover.
Page 59 CAUTION: Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its gold connector bar (on the side you insert into the computer).
Page 60 Getting Started Setting up other devices Replace the memory slot cover. Replace the screws and tighten them. Replace the battery. Turn the computer over and reconnect any cables you removed. To verify that the computer correctly recognizes the memory: ❖ Click Start, then click Control Panel.
Page 61: Using An External Keyboard
Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer provided that the keyboard is USB- compatible. To connect a keyboard, attach its cable to one of the computer’s USB ports. Connecting a printer NOTE: Read the documentation that came with your printer.
Page 62: Connecting A Usb Printer
Getting Started Connecting a printer Connecting a USB printer You can connect a USB-compatible printer to your computer through the USB ports. To determine if the printer is USB- compatible, check its documentation. To make the connection, you need a suitable USB cable, which may come with your printer.
Page 63 Using the Add Printer Wizard To set up a printer with the Add Printer Wizard: Click Start, Control Panel. Click Printers and Other Hardware. Click Printers and Faxes. The Printers and Faxes window appears. Sample Printers and Faxes window Click Add a Printer. The Add Printer Wizard window appears.
Page 64: Connecting An External Diskette Drive
Getting Started Connecting an external diskette drive Sample Add Printer Wizard Follow the instructions. HINT: If you are using more than one printer, make sure the printer name is descriptive enough to help you tell the difference between other printers. Connecting an external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5-inch diskettes.
Page 65: Using External Display Devices
To connect an optional external USB diskette drive, connect the cable to one of the USB ports. Connecting an optional external USB diskette drive Using external display devices Your computer comes with a built-in LCD display, but you can easily attach an external monitor to your computer if you need a larger screen.
Page 66: Directing The Display Output When You Turn On The Computer
Getting Started Using external display devices Directing the display output when you turn on the computer Once you’ve connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key ( While holding down setting you want takes effect.
Page 67: Turning Off The Computer
TECHNICAL NOTE: In order to use the simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. The external display device must support a resolution of 800 X 600 or higher. Display limitations The quality of the display is limited to the capabilities of the external video device.
Page 68: Caring For Your Computer
Cleaning the computer To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. CAUTION: Keep liquid, including cleaning fluid, out of the computer’s keyboard, speaker grille, and other openings.
Page 69: Moving The Computer
You can purchase a carrying case from your Toshiba dealer or through Toshiba’s Web site at toshiba.com. Using a computer lock You may want to secure your computer to a heavy object such as your desk.
Page 70 Getting Started Caring for your computer Insert the cable’s locking end into the security lock slot located on the right side of the computer, then rotate the key a quarter turn and remove it. The computer is now securely locked to deter theft. Locking the computer...
Page 71: Chapter 3: Learning The Basics
Chapter 3 Learning the Basics This chapter lists some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Page 72: Using The Keyboard
Learning the Basics Using the keyboard ❖ Back up your files to diskettes (or other removable storage media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 73: Character Keys
Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The spacebar creates a space character instead of just passing over an area of the page. ❖ The lowercase letter l (el) and the number 1 are not interchangeable.
Page 74: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard Ctrl, Fn, and Alt keys Ctrl Ctrl, Fn and Alt keys , and Ctrl program you are using. For more information, see your program documentation. Function keys The function keys (not to be confused with the 12 keys at the top of the keyboard.
Page 75: Overlay Keys
Overlay keys Sample keyboard overlay keys The keys with numbers and symbols on the front of them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the ten-key keypad on a desktop computer’s keyboard. Using the numeric keypad overlay To turn on the numeric keypad overlay, press simultaneously.
Page 76: Starting A Program
Learning the Basics Starting a program To use the cursor control overlay when the numeric overlay is on, press and hold down keys. To return to the numeric overlay, release To turn off the numeric keypad overlay, hold down the and press indicator panel goes out.
Page 77: Saving Your Work
❖ Use Windows program file ❖ Use the Run dialog box The Windows step-by-step instructions for starting a program from the Start menu. See “Lesson 6: Starting programs” on page Saving your work Before you turn off the computer, save your work to the hard disk drive or a diskette.
Page 78: Printing Your Work
Learning the Basics Printing your work Printing your work Verify that the operating system is set up for your printer as described in TECHNICAL NOTE: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the operating system to run with the additional printer(s).
Page 79: Backing Up Your Files
Backing up your files Backing up your files means copying individual files to a diskette or copying entire sections of your hard disk to another device, such as a tape drive. Copying to an optional diskette drive Insert a diskette into the optional external diskette drive. Click Start.
Page 80: Using The Dvd-Rom Or Multifunction Drive
Learning the Basics Using the DVD-ROM or Multifunction drive Using the DVD-ROM or Multifunction drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform.
Page 81: Drive Components And Control Buttons
Using the DVD-ROM or Multifunction drive A special feature allows you to play audio CDs even when the computer is turned off. For more information, see control buttons” on page Drive components and control buttons The DVD-ROM or Multifunction drive is on the right side of the computer.
Page 82: Cd/Dvd Control Buttons
Learning the Basics Using the DVD-ROM or Multifunction drive HINT: When the computer is off and the DVD-ROM or Multifunction drive is on, press the stop/eject control button to eject a disc. The computer needs to be in CD/DVD mode for this command to work properly.
Page 83: Cd/Dvd Control And Digital Audio Control
Using the DVD-ROM or Multifunction drive Digital audio The play/pause button starts playing the disc or makes it pause if currently playing. The stop/eject button stops a disc that is currently playing. You can eject a disc by pressing the stop/eject button twice. Use this method to eject a disc when the computer is turned off and the sound subsystem is turned on.
Page 84: Inserting A Disc
Learning the Basics Using the DVD-ROM or Multifunction drive Power is off and you press Play/Pause Operating system is running and you press Play/Pause Inserting a disc WARNING: Before playing an audio CD or a DVD, turn the volume down. Playing the disc at maximum volume could damage your ears.
Page 85 Using the DVD-ROM or Multifunction drive Pressing the eject button The disc tray partially opens. CAUTION: To avoid damaging a disc or losing data, check that the disk activity light is off before opening the disc tray. Grasp the disc tray and pull it fully open. Hold the disc by its edges and check that it is clean and free of dust.
Page 86: Removing Compact Discs
Learning the Basics Using the DVD-ROM or Multifunction drive CAUTION: Be careful not to touch the drive’s lens (located underneath the drive’s spindle) or the area around it. Doing so could cause the drive to malfunction. Gently press the center of the disc onto the spindle until it locks into place.
Page 87: Playing An Audio Cd
Start menu or double-click the icon on the desktop. The first time you start the Windows Media Player, it will display in Toshiba Skin mode. Sample Windows Media You may switch the Media Player window to full mode one...
Page 88: Playing A Dvd
This manual has an entire chapter devoted to using WinDVD “WinDVD™” on page When you watch DVD movies on your computer using WinDVD, Toshiba highly recommends that your system’s power management utility is set to full power mode. Player screen Player control panel works much like .
Page 89: Viewing The Contents Of A Cd Or Dvd
Viewing the contents of a CD or DVD CDs and DVDs contain files just like diskettes and the hard disk. CDs are often used to install software or store files that require a lot of space, such as photographs and large presentation files.
Page 90: Connecting The Modem
10/100 Ethernet LAN adapter. To use the modem, you must connect it to a standard RJ11 telephone line. For more information on your modem, go to toshiba.com. NOTE: Due to FCC limitations, speeds of 53 kbps are the maximum permissible rates during downloads. Actual data transmission speeds will vary depending on line conditions.
Page 91: Using The I.link ® Port
❖ Remotely, using the built-in modem and a dial-up connection. To set up the network connection, use the Network Setup Wizard: Click Start and point to All Programs. Point to Accessories, then to Communications, and click Network Setup Wizard. Follow the on-screen instructions. The computer connects with the network.
Page 92: Powering Down The Computer
Learning the Basics Powering down the computer Powering down the computer When you power down the computer, you have three options to choose from: Turn Off (or Shut down), Hibernate and Standby. Each option has its advantages. TECHNICAL NOTE: Before using any of these options to power down your computer, save your files and make sure the drive-in- use lights are off.
Page 93: Hibernation Command
❖ When starting up again, the system does not automatically open programs and files you were previously using. Hibernation command Hibernation mode shuts the computer down completely, but it first saves the current state of the computer to the hard disk. Since Hibernation mode does not require power to maintain the saved information, the system settings are retained indefinitely.
Page 94: Standby Command
Learning the Basics Powering down the computer Standby command The Standby command puts the computer into a power- saving mode. Standby holds the current state of the computer in memory so that, when you restart the computer, you can continue working from where you left off. Factors to consider when choosing Standby: ❖...
Page 95: Using Turn Off Or Shut Down
You can also shut down the computer by pressing the power button or closing the display panel. To use either of these methods, you first need to turn on the feature in Toshiba’s Power Saver utility. Learning the Basics Using Turn Off or Shut down ®...
Page 96 Using Turn Off or Shut down Click Start, then click Control Panel. The Control Panel appears. Click the Performance and Maintenance icon. Click the Toshiba Power Management icon. Select the Advanced tab. The following screen appears. Sample System power mode settings Select Power Off for the options you want.
Page 97: Starting Again After Turn Off Or Shut Down
Close the Control Panel. NOTE: For more information about the Power Saver utility, see “Power Management” on page Starting again after Turn Off or Shut Down To start the computer up again, press and hold the power button until the on/off light changes to green. Using Hibernation Hibernation mode shuts the computer down completely, but it first saves the current mode of the computer to the hard disk.
Page 98 Configuring your computer for Hibernation: Open the Start menu, then click Control Panel. Click the Performance and Maintenance icon, and then click the Toshiba Power Management icon. Click the Advanced tab. Select Hibernation for the options you want. When I press the power button...
Page 99: Using Standby
Using Standby The Standby command puts the computer into a power- saving mode. Standby holds the current mode of the computer in memory so that, when you restart the computer, you can continue working from where you left off. Factors to consider when choosing Standby: ❖...
Page 100: Going Into Standby Mode More Quickly
Toshiba’s Power Saver utility. Open the Start menu, then click Control Panel. Click the Performance and Maintenance icon, and then click the Toshiba Power Management icon. Click the Advanced tab. Select Standby for the options you want. When I press the power button Set this option to Standby to put the computer into Standby mode when you press the power button.
Page 101: Toshiba's Online Resources
Be sure to save your work often. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 102: Chapter 4: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 103: Battery Notice
AC power source, you may want to carry additional charged batteries with you. You can then replace a discharged battery and continue working. NOTE: For optimum DVD performance, Toshiba recommends that you play DVDs while running on AC power rather than on battery power.
Page 104: Charging Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at toshiba.com. Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live wall outlet.
Page 105: Charging The Rtc Battery
Charging the RTC battery The computer contains an internal battery that provides power for the real-time clock (RTC) and calendar. During normal use, the main battery keeps the RTC battery adequately charged. Occasionally, the RTC battery may lose its charge completely, especially if you have had the computer turned off for a long time.
Page 106: Determining Remaining Battery Power
Click Start, then click Control Panel. The Control Panel appears. Click the Performance and Maintenance icon. Click the Toshiba Power Management icon. Click the Battery Power Meter tab. The current power source and battery power remaining section displays the current charge state of the battery. The value displays as a percentage of remaining battery charge.
Page 107: What To Do When The Battery Runs Low
Toshiba’s power-saving options greatly increase the length of time you can use the computer before it becomes necessary to recharge the battery. Toshiba has combined these options into preset power usage modes. You may also set individual power-saving options to suit your own needs.
Page 108: Setting Battery Alarms
Click Start, then click Control Panel. The Control Panel appears. Click the Performance and Maintenance icon. Click the Toshiba Power Management icon. Click the Alarm tab and set the alarm, as desired. Changing the main battery When your battery power is running low, you have two options: connect the computer to an AC power source or install a charged battery.
Page 109: Removing The Battery From The Computer
Removing the battery from the computer Save your work. Turn off the computer or place it in Hibernation mode according to the instructions in page Remove all cables connected to the computer. Close the display panel and turn the computer upside down with the front of the computer facing you.
Page 110: Inserting A Charged Battery
Mobile Computing Changing the main battery While holding the battery release latch toward the unlocked position, use the adjacent half-oval finger slot nearby to gently pull the battery pack free. WARNING: If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in Inserting a charged battery...
Page 111: Safety Precautions
❖ When you install the battery pack, you should hear a click when it is seated properly. ❖ Do not expose the battery pack to fire. The battery pack could explode. Mobile Computing Changing the main battery toshiba.com...
Page 112: Maximizing Battery Life
Mobile Computing Changing the main battery Maximizing battery life To maximize the life of your battery pack: ❖ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps below: Turn off the computer’s power.
Page 113: Disposing Of Used Batteries Safely
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, compact discs and diskettes.
Page 114 Mobile Computing Traveling tips Contact your authorized Toshiba representative for more information, or visit toshiba.com. TECHNICAL NOTE: When traveling by air, you may be required to pass your notebook through airport security equipment. The X-ray equipment will not harm your computer.
Page 115: Chapter 5: Getting To Know The Windows
Chapter 5 Getting to Know the Windows Operating System This chapter introduces the Windows by guiding you through a few basic tasks. Whether you have used a Windows the skill and confidence you will gain from this chapter will more than offset the short amount of time spent going through these lessons.
Page 116: Lesson 1: Exploring The Desktop
Getting to Know the Windows® XP Operating System Lesson 1: Exploring the desktop Lesson 1: Exploring the desktop The desktop is the launching pad for everything you can do in the operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 117 Getting to Know the Windows® XP Operating System Lesson 1: Exploring the desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon. You can create a new desktop icon for any folder, file, or program by dragging the element’s icon from its location in a window to the desktop area.
Page 118: Windows ® Xp File System
Getting to Know the Windows® XP Operating System Lesson 1: Exploring the desktop ❖ Search for files ❖ Access Windows ❖ Run programs ❖ Suspend system activity and turn off the computer For more information on starting programs, see Starting programs” on page Taskbar Each time you open a program, a button associated with that program appears on the taskbar.
Page 119: Lesson 2: Using The Touchpad And Control Buttons Together
Getting to Know the Windows® XP Operating System Lesson 2: Using the TouchPad and control buttons together the files and folders reside in your computer on a storage device, such as a disk drive. You can think of your computer storage system in terms of office equipment.
Page 120 Getting to Know the Windows® XP Operating System Lesson 2: Using the TouchPad and control buttons together With the pointer in an empty area of the desktop, click the secondary button to open the desktop shortcut menu. As the name implies, shortcut menus provide quick access to many operating system features.
Page 121 Getting to Know the Windows® XP Operating System Lesson 2: Using the TouchPad and control buttons together Now click the Close button in the upper-right corner of this window. The My Computer window is closed. Click an empty area of the taskbar at the bottom of the screen and, while holding down the primary button, use the pointing device to drag the pointer to the right edge of the desktop, then release the primary button.
Page 122: Lesson 3: Learning About The Internet
Getting to Know the Windows® XP Operating System Lesson 3: Learning about the Internet If you can’t move the taskbar, it’s probably because it has been locked. To unlock it: Right-click the taskbar. A menu appears. If the Lock the taskbar option has a check mark, then the feature is in use.
Page 123 Getting to Know the Windows® XP Operating System Lesson 3: Learning about the Internet the Web browser itself. But you can also type a Web address in the My Computer window. DEFINITION: URL stands for Uniform Resource Locator, which is the address that defines the route to a file on the Web or any other Internet facility.
Page 124: Lesson 4: Creating A New Document
Getting to Know the Windows® XP Operating System Lesson 4: Creating a new document Lesson 4: Creating a new document This lesson teaches you how to create a text file without having to first open a program. Move the pointer to an empty area of the desktop, then click the secondary button.
Page 125: Lesson 5: Creating A New Folder
Getting to Know the Windows® XP Operating System Notice that when the document opens, there is a new button on the taskbar that reads New Doc.txt- Notepad (the name may be too long to fit into the taskbar space but, if you point to the name, the complete name is visible).
Page 126: Lesson 6: Starting Programs
Getting to Know the Windows® XP Operating System Lesson 6: Starting programs The operating system displays the document as an icon on the desktop. Click the document icon and drag it toward your New Folder icon. Position the document icon over the New Folder icon until it changes color, then release the primary button.
Page 127 Getting to Know the Windows® XP Operating System Sample Paint window To launch Windows Explorer: Click Start, then point to All Programs. Click Windows Explorer. The operating system opens Windows provides access to all your computer’s resources. For example, it lets you see all the files in a particular folder on the computer’s hard disk.
Page 128 Getting to Know the Windows® XP Operating System Lesson 6: Starting programs Sample Windows Explorer window Notice the taskbar now has two buttons on it—one for Paint and one for Windows To re-display the Paint program, click the Paint button on the taskbar.
Page 129: Lesson 7: Resizing, Repositioning, And Hiding Windows
Getting to Know the Windows® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Lesson 7: Resizing, repositioning, and hiding windows If you have followed the lessons in this chapter, you now have a screen with several program windows open. You can organize these windows by resizing and repositioning windows so that you can see more than one of them at a time.
Page 130: Using The Taskbar
Getting to Know the Windows® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Using the taskbar If you have application windows open on the desktop, you can rearrange them by right-clicking on the program’s button on the taskbar, and clicking the desired option. You have the following options: ❖...
Page 131: Resizing And Moving Windows
Getting to Know the Windows® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows The Paint window expands to fill the screen, hiding everything except the taskbar. Notice that the Maximize button has changed. It is now called the Restore button. HINT: Maximizing a program is a good way to work when you are only using that program and do not want any distractions on the screen.
Page 132: Lesson 8: Closing Programs
Getting to Know the Windows® XP Operating System Lesson 8: Closing programs Now that the windows are side by side, you can see how you could refer to one window while working in the other. Resizing and moving windows allows you to rearrange the desktop to suit your needs.
Page 133: Lesson 9: Creating Shortcuts
Getting to Know the Windows® XP Operating System Lesson 9: Creating shortcuts By adding shortcuts to your desktop, you can open programs or files with the click of a button. You will probably want to create shortcuts for the programs you use most frequently. This lesson explains how to create shortcuts using two operating system accessories, Calculator and Character Map, as examples.
Page 134: Creating A Shortcut To The Character Map
Getting to Know the Windows® XP Operating System Lesson 9: Creating shortcuts Type Calculator The operating system displays the new shortcut on your desktop. Creating a shortcut to the Character Map Use this method when you don’t know the name and location of the program file.
Page 135 Getting to Know the Windows® XP Operating System Sample Search Results dialog box HINT: Search also allows you to perform searches on the Internet. Click All files and folders. Type in the text box labeled: In all or part of the file char name.
Page 136: Lesson 10: Changing The Screen Saver
Getting to Know the Windows® XP Operating System Lesson 10: Changing the screen saver In the shortcut menu, click Create Shortcut(s) Here. NOTE: Shortcut icons can be recognized by an arrow in the lower left corner. Deleting or changing the shortcut icons will not affect the program to which they refer.
Page 137 Getting to Know the Windows® XP Operating System Lesson 10: Changing the screen saver Move the pointer to an empty area of the desktop, then click the secondary button. The operating system displays the desktop shortcut menu. Click Properties. The operating system opens the Display Properties dialog box.
Page 138: Lesson 11: Setting The Date And Time
Getting to Know the Windows® XP Operating System Lesson 11: Setting the date and time You can view any object’s properties by clicking the object with the secondary button, then choosing Properties from the shortcut menu that appears. The next lesson explains how to set two other properties—the date and time.
Page 139 Getting to Know the Windows® XP Operating System Lesson 11: Setting the date and time Sample Date and Time Properties dialog box HINT: To open the Date and Time Properties dialog box more quickly, either click the time display on the taskbar with the secondary button, then click Adjust Date/Time, or double-click the time display.
Page 140: Lesson 12: Removing Objects From The Desktop
Getting to Know the Windows® XP Operating System Lesson 12: Removing objects from the desktop Lesson 12: Removing objects from the desktop Earlier in this tutorial, you created a new icon on the desktop. Since everything you have done to this point has been just practice, you may want to return the desktop back to its original uncluttered state.
Page 141 Getting to Know the Windows® XP Operating System Lesson 12: Removing objects from the desktop Sample Recycle Bin window To completely remove an object, select it, and then click File, Delete. The Confirm File Delete window appears. Click Yes to permanently delete the file. The object is permanently deleted from the Recycle Bin.
Page 142: Lesson 13: Using System Restore
Getting to Know the Windows® XP Operating System Lesson 13: Using System Restore To delete everything from the Recycle Bin at once, choose Empty Recycle Bin from the File menu. HINT: Empty the Recycle Bin periodically. Even though an item is moved to the Recycle Bin, it still uses valuable space on the hard disk drive until it is deleted from the Recycle Bin.
Page 143: Lesson 14: If I Am Lost, What Do I Do
Getting to Know the Windows® XP Operating System Sample System Restore welcome screen The Windows process of storing your system settings for future use. It also guides you through restoring your system to the selected date or time. Lesson 14: If I am lost, what do I do? This teaches you how to use some of the Help features in the ®...
Page 144 Getting to Know the Windows® XP Operating System Lesson 14: If I am lost, what do I do? If you do not see the index, click index. Help and Support displays the Index. Sample Help and Support Index The left side of the screen contains the index. The text box above the index, where the cursor is flashing, lets you type in a topic you want to find in the index.
Page 145: Using The Windows Xp Tour
Getting to Know the Windows® XP Operating System Sample help window for drawings Notice that under the category subcategory: Highlight Help opens a topic screen that, in the window’s right pane, gives a brief description of Paint and provides different ways for accessing the program, including through use of a hot link (Paint).
Page 146: Lesson 15: Turning Off Your Computer
Getting to Know the Windows® XP Operating System Lesson 15: Turning off your computer The Windows Follow the instructions. Sample Windows Lesson 15: Turning off your computer It is very important that you let the operating system turn off your computer. As it shuts down, the operating system performs a number of tasks that ensure that everything is in place the next time you turn on the computer.
Page 147: Chapter 6: Exploring Your Options
Chapter 6 Exploring Your Options In this chapter, you will explore other features of your notebook computer. ® Windows XP special features The Windows features and enhancements, including: ❖ New system file protection ❖ A system restore function, allowing you to rollback the system to its previous mode ❖...
Page 148: Personalizing Your Desktop
Exploring Your Options Personalizing your desktop Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work. You can customize the following aspects of the desktop: ❖ Taskbar —...
Page 149: Changing Desktop And Browsing Style
Changing desktop and browsing style The operating system enables you to customize the way you view your desktop and browse the files and folders on your local computer or network file server. You can make it so that: ❖ Items that normally require a double-click will open with a single click.
Page 150: Personalizing Individual Windows
Exploring Your Options Personalizing your desktop Sample Web-style option Click the preferred options. Click Apply, click OK. Personalizing individual windows Just as you can display a Web page on your desktop, you can also display a Web page in an individual window. If you subscribe to the Web page, it can be automatically updated on a regular basis.
Page 151: Customizing Window Toolbars
Exploring Your Options Personalizing your desktop Customizing window toolbars You can display one or more customizable toolbars at the top of a window. As you browse, the operating system detects the kind of information presented in the window and automatically displays the appropriate toolbar buttons and menus.
Page 152: Displaying Information About Each Folder
Exploring Your Options Personalizing your desktop The elements you can add to the top of the window are: Toolbar element Address Bar Standard buttons Displays buttons for commonly used Displaying a toolbar in a window Click Start, then click My Computer. The My Computer window appears.
Page 153 Double-click the folder you want to open. In the Tools menu, select Folder Options. The Folders Options box appears. In the Tasks section, click the button for Show common tasks in folders. Click Apply, then OK. Helpful information on how to use the folders appears on one side of the window.
Page 154: Using Your Computer At The Office
Exploring Your Options Using your computer at the office Using your computer at the office By connecting an external monitor, external full-size keyboard, an external mouse and an external diskette drive, you can work with your notebook as if it were a standard office computer.
Page 155: Connecting The Modem To A Telephone Line
Before you can use the modem, you must connect it to a standard telephone line. See page For more detailed information regarding your computer’s modem, visit Toshiba’s web site at toshiba.com. Exploring Your Options Using your computer at the office “Connecting the modem” on...
Page 156: Connecting Your Computer To A Network
A remote network, you need a dial-up connection. ❖ A wireless network, you need a wireless networking PC Card, or contact your authorized Toshiba representative. Setting up the connection To set up a dial-up connection, use the New Connection Wizard: Click Start and point to All Programs.
Page 157: Setting Up A Direct Cable Connection
Your Wi-Fi Mini PCI module is integrated into your computer system. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Partner. Setting up a direct cable connection To establish a direct cable connection with another computer: Click Start, All Programs.
Page 158: The Internet
Exploring Your Options An overview of using the Internet ❖ Internet Service Providers ❖ Connecting to the Internet ❖ Surfing the Internet ❖ Internet features ❖ Uploading and downloading files from the Internet For more information about the Internet refer to, Learning about the Internet”...
Page 159: Connecting To The Internet
You can connect to the Internet by using a telephone and modem or through other higher-speed communication methods such as Digital Subscriber Lines (DSL), cable, and satellite links. Connecting to the Internet To connect to the Internet, you need: ❖ A modem ❖...
Page 160: Internet Features
Exploring Your Options An overview of using the Internet Internet features The Internet offers many types of communication tools to help you perform many tasks. ❖ Internet email To send and receive email of your own, you need a mailbox on the Web, or an email address. If you have an account with an ISP, you can probably set up an email address at the same time as you sign up for the service.
Page 161: Exploring Video Features
Exploring video features Your computer’s video features include: ❖ Viewing Windows on the computer screen (display panel or external monitor) or on a television set. Viewing presentations or DVD movies on your television Your computer is equipped with an S-video jack and an audio/headphones jack.
Page 162: Playing Dvds
Exploring Your Options Exploring video features Sample Display Properties dialog box ❖ Click the Settings tab. ❖ Slide the Screen area slider bar toward Less until the setting reads 800 x 600. ❖ Click Apply. Press FN+F5 Start playing your movie or presentation. Playing DVDs Open the DVD-ROM or Multifunction drive tray.
Page 163: Exploring Audio Features
Play Step forward Speed Ring Step backward Pause Time Control Time shift Sample WinDVD control panel For more information about using WinDVD, see “WinDVD™” on page Exploring audio features You can use your computer to record sounds using an external microphone. You can play .wav sound files or audio CDs using the built-in speakers, headphones or external speakers.
Page 164: Using A Microphone
Exploring Your Options Exploring audio features Using a microphone Attaching a microphone Connect an external microphone to the computer. Click Start, point to All Programs, Accessories, Entertainment, then click Sound Recorder. Positioning bar Sample Sound Recorder screen Record Stop Play Skip forward Skip backward...
Page 165: Adjusting Recording Quality
Click the Record button and speak normally into the microphone. NOTE: You can only record 60 seconds at a time. When you have finished recording, click the Stop button. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu. Adjusting recording quality The better the quality of the recording, the more disk space the sound file requires.
Page 166 Exploring Your Options Exploring audio features TECHNICAL NOTE: Use amplified speakers that require an external power source. Other types of speakers will be inadequate to produce sound from the computer. To play back sound files through external speakers or headphones: Locate the headphone jack on the right side of the computer.
Page 167: Using Pc Cards
Using PC Cards PC Cards expand your computer’s capabilities and usefulness. You can purchase additional PC Cards from your dealer. Most PC Cards conform to the PCMCIA (Personal Computer Memory Card International Association) standard. Your computer has two stacked PC Card slots and supports two types of PC Cards, known as types II and III: ❖...
Page 168: Inserting Pc Cards
Exploring Your Options Using PC Cards Inserting PC Cards Inserting a PC Card If your PC Card does not support hot swapping, save your data and turn off the computer before inserting the PC Card. For more information, see page 170.
Page 169: Removing Pc Cards
Removing PC Cards Click the Safely Remove Hardware icon on the taskbar. Click Safely remove xxxx, where xxxx is the identifier for your PC Card. The operating system advises you that you may safely remove the card. Ejecting a PC Card Remove the PC Card and store it properly.
Page 170: Hot Swapping
Exploring Your Options Using PC Cards Hot swapping One of the great things about PC Cards is that you can replace one PC Card with another while the computer is on. This is called “hot swapping.” Hot swapping precautions Although you can insert a PC Card at any time, to avoid data loss never remove a card while it is in use.
Page 171: Chapter 7: Toshiba Utilities
Chapter 7 Toshiba Utilities Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to ascertain certain system details, set additional options, or change default options. These utilities are described in this chapter: ❖...
Page 172: Power Management
The Power Management feature enables you to control your computer’s power usage, regardless of the source, and use the many preset power modes, or define your own. To access the Toshiba Power Management Utility. Click Start, then click Control Panel. The Control Panel appears.
Page 173 Normal or Long Life settings. By changing the options that appear in the Toshiba Power Management window and clicking OK, you can reconfigure that function. Any options that you change become effective when you click either OK or Apply.
Page 174: Chapter 8: Windvd
Chapter 8 WinDVD ™ WinDVD chapter explains how to use this program. Playing DVDs TECHNICAL NOTE: For optimum DVD performance, play DVDs while your computer is connected to AC power. For systems with a DVD-ROM or multifunction drive, you can use WinDVD to play DVDs. WinDVD is an easy-to-use, full-featured multimedia control center that helps you get the most out of the exciting world of DVD technology.
Page 175 Sample DVD Drive Window NOTE: If you wish to have WinDVD run automatically, select Play DVD movie using WinDVD, then select the Always do the selected action checkbox. This checkbox is unchecked by default. To open WinDVD manually: Double-click the WinDVD icon on your desktop, or click Start, and point to All Programs.
Page 176: Using The Windvd Slider Bar (Location)
WinDVD™ Using the WinDVD control panel Sample WinDVD video window with the control panel Using the WinDVD slider bar (location) The slider bar enables you to move forward or backward through the DVD content. Move the slider bar to the left to go backward or move it to the right to go forward.
Page 177: Using The Control Panel Playback Buttons
Play Step forward Speed Ring Step backward Pause Time Control Time shift Sample WinDVD control panel You can open a shortcut menu by positioning the cursor over the WinDVD window (other than over the control panel), then clicking the secondary button. The shortcut menu contains the same features as the control panel, plus the enable caption feature, which displays captions for the hearing impaired.
Page 178 WinDVD™ Using the WinDVD control panel Sample WinDVD control panel with expanded view for showing advanced features Click this To do this Play — Starts disc play- back. Step forward — Steps for- ward in the playback one frame at a time. Pause —...
Page 179 Using the WinDVD control panel Click this To do this Speed Ring — Enables you to control the speed at which the DVD plays. Move the slider upward to play the movie in fast forward. Move it further upward to increase forward speed.
Page 180 WinDVD™ Using the WinDVD control panel Click this To do this Menu— Opens the various menus of the inserted DVD. Mute — Click to mute movie sound. Click again to restore movie sound to its original level. Repeat — Shows the cur- rent media loop settings, including repeat chapter, repeat title, loop, or no...
Page 181: Maximizing The Video Window
Maximizing the video window To close the WinDVD control panel and expand the video window to fill the screen, click the Maximize button. To display the control panel again, double-click anywhere in the video window. Using WinDVD Advanced Features TECHNICAL NOTE: The DVD author determines what features the DVD supports.
Page 182: Using Playlists
WinDVD™ Using playlists Using playlists TECHNICAL NOTE: The DVD author determines what features the DVD supports. Depending on the DVD format and your computer’s hardware configuration, some of the control panel features may be unavailable when playing a DVD. Unsupported features appear gray, and you cannot select them.
Page 183 Sample Playlist dialog Select New Playlist from the menu. The Playlist window opens. Sample WinDVD Playlist window Select File to enable selection of a file, or Disc to create a playlist for an entire disc. Locate each file (you may select multiple files) for your playlist using the directory browser.
Page 184: Playing A Playlist
WinDVD™ Using playlists Browse to the folder where you want to save your playlist, name the playlist, then click Save. Playlist files are saved with the file extension .plf. The playlist can be reopened and played. Playing a Playlist After creating a new playlist, you can open it with WinDVD. The playlist keeps your selections organized so that you can play your favorites at any time.
Page 185: Getting Help
Locate the playlist you wish to open, then click Open. The Playlist window appears. Click Load List to open the saved playlists. Browse to the playlist you want to open then click Open and WinDVD displays the playlist. Getting Help Click the Help button to open the WinDVD Help system.
Page 186: Chapter 9: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 187 To close a program that has stopped responding: Press Ctrl Click Windows Task Manager. The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 188: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer Press Ctrl Notepad. Press Enter some notes describing what you were doing when you received the message. Save the file and refer to it when you contact the software manufacturer.
Page 189: The Windows ® Operating System Is Not Working
The Windows® operating system is not working external diskette drive and press the left or right arrow key and choose your boot-up device. HINT: Press F12 as you power on the computer to access the menu. The computer displays the message.
Page 190: The Windows ® Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working ❖ The screen does not look right. Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.
Page 191: Internet Problems
The Windows® operating system is not working ❖ Return to OS Choices (menu) For additional information, refer to System Restore” on page documentation for further explanation. TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow.
Page 192: Resolving A Hardware Conflict
If Something Goes Wrong Resolving a hardware conflict Click Start, then click Help and Support. The Help and Support window appears. Then do one or both of the following: ❖ In the search field, type in the topic of the problem with which you need help and follow the on-screen instructions.
Page 193: Resolving Hardware Conflicts On Your Own
The recommended procedure for getting multiple devices to work together is to add and set up one device at a time. After you add each device, test it to make sure it and all previously connected devices work. The device most recently connected to the system is the one most likely to be causing a hardware conflict.
Page 194: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict ❖ Disable another system component and use its resources for the new device, see Manager” on page ❖ Reconfigure the device so that its requirements do not conflict. Refer to the device’s documentation for instructions about changing settings on the device.
Page 195 Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device. To check a device’s properties: Click Start, Control Panel, Performance and Maintenance, and then Administrative Tools.
Page 196: Memory Card Problems
If Something Goes Wrong Resolving a hardware conflict ❖ The Resource tab, which lists resources assigned to the monitor, DVD-ROM, DVD-ROM/CD-RW, diskette disk drive, and other power-using functions. ❖ The Drivers tab, which displays the drivers being used by the device. Memory card problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related.
Page 197 The AC power light does not come on when you plug in the AC adapter and power cable. Make sure the AC adapter and power cable are firmly plugged into both the wall outlet and the computer. If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance.
Page 198: Keyboard Problems
If Something Goes Wrong Resolving a hardware conflict memory module, that takes its power from the battery? Is your software using the hard disk more? Is the display power set to turn off automatically? Was the battery fully charged to begin with? All these conditions affect how long the charge lasts.
Page 199 You may have activated the instant password feature by pressing password, press the . If no password is registered, press Enter reactivates and allows you to continue working. If you are using the built-in screen, make sure the display priority is not set for an external monitor. To do this, press simultaneously.
Page 200: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict The built-in screen flickers. Some flickering is a normal result of the way the screen produces colors. To reduce the amount of flickering, try using fewer colors. To change the number of colors displayed: Point at the desktop and click with the secondary button.
Page 201 Sometimes a disk problem may cause one or more files to appear to have garbage in them. Typical disk problems are: You are having trouble accessing a disk, or one or more files appear to be missing. Make sure you are identifying the drive by its correct name (A: or C:).
Page 202 If Something Goes Wrong Resolving a hardware conflict Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software, which is available from your dealer.
Page 203: Dvd-Rom Or Multifunction Drive Problems
DVD-ROM or Multifunction drive problems You cannot access a disc in the drive. Make sure the drive tray has closed properly. Press gently until it clicks into place. Open the drive tray and remove the disc. Make sure the drive tray is clean.
Page 204 If Something Goes Wrong Resolving a hardware conflict WinDVD problems: general issues WinDVD performance and quality based upon your system’s available resources. Changes made to the system or its configuration may impact the playback performance of the WinDVD player. WinDVD controls are disabled. Controls may be grayed out by commands on the DVD disc.
Page 205: Secondary Ide Channel Dma Setting
Slow playback performance. DVD playback is a resource intensive application. Other applications and/or changes to your system hardware, software or configuration can impact playback performance. If playback is slower than normal, try: Closing any other open applications to improve the performance of the DVD playback.
Page 206 If Something Goes Wrong Resolving a hardware conflict Double-click the Secondary IDE Channel icon. The Secondary IDE Channel Properties window displays. Sample Secondary IDE Channel Properties window Click Advanced Settings. Look at Device 0. The current transfer mode should be Ultra DMA Mode 2.
Page 207 WinDVD will not function properly with “debug” software installed. The WinDVD application will not function properly if it detects that debug software is present on the system. Remove the debug software to restore functionality of WinDVD. Minimum system requirements WinDVD performs best when these recommended components are present in your system: ❖...
Page 208 If Something Goes Wrong Resolving a hardware conflict Error message and additional information ® Microsoft components are missing. ® Microsoft not installed properly on the system. No audio subsystem could be found for playback. There is a problem with the audio card or audio compo- nent within the system.
Page 209 Error message and additional information The audio settings are incorrect. Please check sound card or drivers. The audio card was found, but there is a problem with the audio card or drivers. The wrong audio driver may be installed in the sys- tem.
Page 210 If Something Goes Wrong Resolving a hardware conflict Error message and additional information This DVD disc cannot be played in this region. The selected region cannot be used due to one of the following: The Region Code of WinDVD and the DVD disc do not match.
Page 211: Sound System Problems
Error message and additional information This file appears to contain unsupported data. The drive or disc cannot be found. This may be caused by one of the following: No disc in the DVD-ROM or Multifunction drive. No DVD-ROM or Multi- function drive.
Page 212: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict PC Card problems PC Cards (PCMCIA-compatible) include many types of devices, such as a removable hard disk, additional memory, or a pager. Most PC Card problems occur during installation and setup of new cards. If you’re having trouble getting one or more of these devices to work together, several sections in this chapter may apply.
Page 213 PC Card checklist ❖ Make sure the card is inserted properly into the slot. “Using PC Cards” on page 167 Cards. ❖ Make sure all cables are securely connected. ❖ Occasionally a defective PC Card slips through quality control. If another PCMCIA-equipped computer is available, try the card in that machine.
Page 214 If Something Goes Wrong Resolving a hardware conflict system. Use Device Manager to make sure each device has its own I/O base address. See Manager” on page 194 Since all PC Cards share the same socket, each card is not required to have its own address.
Page 215: Printer Problems
Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray.
Page 216: Modem Problems
It should be set up to transmit at 300, 1200, 2400, 4800, 9600, 14400, 28800, 33600 bps (bits per second) or higher. For more information, go to toshiba.com. The modem is on, set up properly and still will not transmit or receive data.
Page 217 On a regular basis, back up the information stored on your hard disk. Here are some ways you can do this: ❖ Copy files to diskette, following the steps in work” on page ❖ Connect a tape drive to the system and use specialized software to copy everything on the hard disk to a tape.
Page 218: If You Need Further Assistance
Consult the dealer from whom you purchased your computer and/or program. Your dealer is your best source for current information. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you.
Page 219: Other Toshiba Internet Web Sites
Toshiba voice contact Before calling Toshiba, make sure you have: ❖ Your computer’s model and model number. ❖ Your computer’s serial number. ❖ The computer and any optional devices related to the problem. ❖ Backup copies of your operating system and all other preloaded software on diskettes or CD-ROM.
Page 220: Toshiba's Worldwide Offices
If Something Goes Wrong Toshiba’s worldwide offices Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V. Excelsiorlaan 40 B-1930 Zaventem Belgium Czech Republic CHG Toshiba, s.r.o.
Page 221 Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Mexico and all of Latin America Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. 800-457-7777 (outside of the US)
Page 222 Toshiba Information Systems (U.K) Ltd. Toshiba Court Weybridge Business Park Addlestone Road Weybridge KT15 2UL United Kingdom The Rest of Europe Toshiba Europe (I.E.) GmbH Hammfelddamm 8 D-4-1460 Neuss Germany Spain Toshiba Information Systems (España) S.A. Parque Empresarial San Fernando...
Page 223: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. All functionality is the same when the keyboard is in wireless mode.
Page 224: Instant Password Security
Instant password security This hot key causes the screen to become blank, hiding whatever was previously displayed. Without a password Fn + F1 activates instant security. Using the mouse or any key will make the display reappear. With a password key combination turns off the display and activates instant security.
Page 225: Power Usage Mode
The power usage modes in the Windows operating system under AC power are Full Power and User Defined. The properties of each mode are set in the Toshiba Power Management utility. For more information, see “Power Management” on page 172.
Page 226: Stand By Mode
Stand By mode This hot key puts the computer into Stand By mode. ❖ A message box is displayed by default to confirm that the computer is going into Stand By mode. This message box can be set so it does not display. Sample Stand By confirmation box For more information about Stand By mode, please see...
Page 227: Hibernation Mode
Hibernation mode This hot key puts the computer into Hibernation mode. ❖ If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it does not display. Sample Hibernation confirmation box If Hibernation mode is disabled, this hot key will not respond.
Page 228: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes options are: In order to use a simultaneous mode, you must set the resolution of the built-in display panel to match the resolution of the external display device. Simultaneous mode works only with external monitors that support 800 X 600 resolution and higher.
Page 229: Enabling A Wireless Device
Enabling a wireless device This hot key enables/disables the optional wireless devices in your computer. The wireless mode is: Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. To use the TouchPad, see page Keyboard hot keys This hot key turns the cursor control overlay on and off.
Page 230: Appendix B: Power Cable Connectors
Appendix B Power Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 231: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only compact disc read-write...
Page 232 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI PCMCIA direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 233 SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 234 Glossary alternating current (AC) — The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare direct current (DC). application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems.
Page 235 bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus.
Page 236 Glossary color palette — A set of specified colors that establishes the colors that can be displayed on the screen at a particular time. compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another.
Page 237 direct memory access (DMA) — A dedicated channel, bypassing the CPU, that enables direct data transfer between memory and a device. directory — See folder. disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs.
Page 238 Glossary DVD — An individual digital versatile (or video) disc. See also DVD-ROM. DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs.
Page 239 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off.
Page 240 Glossary high-density diskette — A 3.5-inch diskette that holds 1.44 MB of data. See also diskette. hot key — (1) A feature in which certain keys in combination with key can set system options or control system parameters, such as the battery save mode. (2) A key or combination of keys that activates a memory resident program.
Page 241 liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it.
Page 242 Glossary multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation. Musical Instrument Digital Interface — See MIDI. network — A collection of computers and associated devices that are connected by communications facilities. A network allows you to share data and peripheral devices, such as printers, with other users and to exchange electronic mail.
Page 243 peripheral — Any device, such as a printer or joystick, that is attached to the computer and controlled by the computer’s CPU. pixel — Short for “picture element.” The smallest dot that can be produced on a screen or printer. Plug and Play —...
Page 244 Glossary resolution — A measure of the sharpness of the images that can be produced by a printer or displayed on a screen. For a printer, resolution is expressed in dots per inch (dpi). For a screen, it is expressed as the number of pixels available horizontally and vertically.
Page 245 system prompt — The symbol (in the MS-DOS generally a drive letter followed by a “greater than” sign) indicating where users are to enter commands. TFT display — See active-matrix display. universal serial bus (USB) — A serial bus that supports a data transfer rate of up to 480 Mbps for peripherals such as keyboards and pointing devices.
Page 246: Index
Index Numerics 101-key keyboard AC adapter 37, 50, 54 AC power light Accessories programs adding memory alarms low battery audio CDs playing audio features avoiding injury battery alarms changing charge not lasting 52, 67, 104 charging conserving power disposal inserting installing 37, 54, 105 light...
Page 247 Index previous track Start stop calculator CD Player control panel CD/DVD control buttons CD/DVDs caring for 84, 85 inserting viewing contents CD-ROM, DVD-ROM, Multifunction drive safety instructions CD-ROMs writing 35, 89 inserting problem solving changing main battery channels Character Map charging 52, 67, 104 main battery...
Page 248 Index television to a network USB-compatible keyboard video projector conserving battery power cursor control mode light customizing taskbar window toolbars Date date and time setting DC-IN jack desktop background browsing style choosing style and browsing options creating new icon creating shortcuts major features properties shortcut menu...
Page 249 Index email energy saving features environmental considerations ergonomics lighting posture seating guidelines work habits error messages device driver conflict general hardware problem non-system disk or disk error 189, 202 problem with display settings/ current settings not working with hardware program has performed an illegal operation warning resume failure WinDVD...
Page 250 Index Hypertext Transfer Protocol (HTTP) IBM 101-key enhanced keyboard icon desktop internet explorer moving to desktop naming safety indicator panel keyboard 35, 37 system inserting CDs and DVDs main battery PC Cards installing main battery memory module interference statement Internal/External mode Internet bookmarked site not found chat rooms...
Page 251 Index adding problem solving removing removing expansion slot cover memory module inserting microphone jack Microsoft Internet Explorer Microsoft Support Online Web site Microsoft Windows XP minimizing modem determining COM port 31, 90 port problem solving resetting port to default settings upgrading modem, using monitor...
Page 252 PC Card computer will not power up contacting Toshiba corrupted/damaged data files Device Manager disabling a device disk drive is slow display is blank...
Page 253 Index Multifunction drive tray doesn’t eject no sound non-system disk or disk error 189, 202 PC Card checklist error occurs hot swapping fails not recognized slots appear dead power and batteries printer program not responding program not working properly screen does not look right/flickers system resources trouble prevention URL address not found...
Page 254 Toshiba Toshiba Accessories Toshiba Forum Toshiba online services Toshiba Power Saver Toshiba software offer TouchPad travelling tips Turn Off turning computer on/off tutorials Uniform Resource Locator (URL) Universal Serial Bus (USB) port...
Page 255 USB ports USB-compatible keyboard connecting using modem PC Cards wireless mouse and control buttons utilities Power Management Toshiba Power Saver video features exploring video projector adjusting display connecting video/audio out jack volume control dial volume, adjusting warranty SelectServ wav files...
Page 256 Index wireless features Wi-Fi wireless mouse using wireless networking Wizards Add Printer Network Setup New Connection Wizard World Wide Web...

This manual is also suitable for:

1955-s806 1955-s807 Satellite 1955 Satellite 1955 series

Toshiba 1955-S805 User Manual

Chapter 1: Finding Your Way Around

Chapter 2: Getting Started

Chapter 3: Learning the Basics

Chapter 4: Mobile Computing

Chapter 5: Getting to Know the Windows

Chapter 6: Exploring Your Options

Chapter 7: Toshiba Utilities

Chapter 8: Windvd

Chapter 9: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cable Connectors

Quick Links

Related Manuals for Toshiba 1955-S805

Summary of Contents for Toshiba 1955-S805