USB
Refer also to your USB device's documentation.
Problem
USB device does
not work
TV output signal
Problem
Display on TV is poor
No display
Hardware and system checklist
Procedure
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows documentation
for information on checking the drivers.
If you are using an operating system that does
not support USB, you can still use a USB mouse
and/or USB keyboard. If these devices do not
work, make sure the USB KB/Mouse Legacy
Emulation item in HW Setup is set to Enabled.
This feature works only for mouse and keyboard.
Also, the mouse and keyboard must be con-
nected, before you boot the computer.
If problems persist, contact your dealer.
Procedure
Make sure the TV type is correct for your area:
NTSC (US) or PAL (Europe).
Try adjusting the contrast and brightness controls
on the external monitor.
9-21