Toshiba RAV-SM561CT-E Service Manual page 44

6. Set error
If flashing is displayed when the program operation has been set up, correct the
ERROR
time following the procedure below.
1. When flashing is displayed, ON time of the failed program flashes.
ERROR
PROGRAM1
PROGRAM2
PROGRAM3
2. Push button to flash the time to be corrected.
SET
3. Using / buttons, correct ON/OFF time.
MM
HH
4. Push button. When the setup is correctly performed,
SET
5. The correction has completed by pushing
CAUTION
• When ON/OFF time is set as follows,
ERROR
1) When a part of the operation time makes inroads into a part of another operation time
Example: ON time OFF time
2) When OFF time is ahead of ON time
Example: ON time OFF time
3) When ON time is same as OFF time
Example: ON time OFF time
4) ON time or OFF time is singly set up
Example: ON time OFF time
[Is not set]
• The following cases are not set error.
1) OFF time of the previous cycle is same as ON time of the next cycle.
Example: ON time OFF time
2) When the next cycle is set to the time before the
set time of the previous cycle
Example:
ON time OFF time ON time
Pushing the button changes the order in order of time.
PROGRAM
3) When both ON and OFF times are same
Example: ON time OFF time
SuMoTuWeTh Fr Sa
ERROR
display disappears.
ERROR
button.
PROGRAM
is displayed.
0:00 23:59
ON OFF
ON OFF
0:00 23:59
OFF ON
0:00 23:59
ON OFF
0:00 23:59
ON OFF
0:00 23:59
ON OFF
ON OFF
0:00 23:59
OFF time
ON OFF
ON OFF
Continuous operation
for 24 hours
7. How to copy the program operation time
When setting the program operation, already set program can be copied and set to
the other day of the week.
<Example: To copy the operation contents of Monday to Tuesday>
1. Push CHECK button in normal display.
2. Push button and put the operation reserve
DAY
indication on the day of the week of which the
program operation is already set.
(Monday in the example)
3. Push button.
PROGRAM
Present day of the week indication and Operation
reserve indication flash.
4. Push button and put the present day of the
DAY
week indication on the day of the week to be copied.
(Tuesday in the example) (For continuous copying,
push button, and then push
DAY
SET
5. Push button. The operation reserve indication
PROGRAM
the week.
8. How to check the program operation time
1
SuMoTuWeTh Fr Sa
PROGRAM1
ERROR
PROGRAM2
PROGRAM3
2
WEEKLY TIMER
PROGRAM DAY SET CANCEL
HH MM
CLEAR CHECK
1,
2
3
CAUTION
1. While reserve indication is
flashing, the display does not
change even if other buttons are
pushed than , , and
DAY CHECK
button.
PROGRAM
2. If 30 seconds have passed while
the reserve indication is flashing
without pushing , or
DAY CHECK
button, the display returns
PROGRAM
3
automatically to the original
display. (Normal display)
SuMoTuWeTh Fr Sa
PROGRAM1
ERROR
PROGRAM2
PROGRAM3
WEEKLY TIMER
PROGRAM DAY SET CANCEL
HH MM CLEAR CHECK
button.)
goes on under the copied day of
Push button.
CHECK
<Example: Case to check the program
operation time of Wednesday in Monday>
• The operation reserve indication flashes in
the normal display status.
SuMoTuWeTh Fr Sa
PROGRAM1
ERROR
PROGRAM2
PROGRAM3
Push button and put the operation
DAY
reserve indication on the day of the week
to be checked.
• Every pushing button, the operation
DAY
reserve indication flashes and the contents
of program operation time of the day of the
week on which the operation reserve
indication has been put on is displayed.
SuMoTuWeTh Fr Sa
PROGRAM1
ERROR
PROGRAM2
PROGRAM3
Push button.
CHECK
• It turns to be normal indication.