Sd Card Care; Memory Expansion - Toshiba Portege M100 User Manual

SD card care

Set the write-protect switch to the lock position, if you do not want to
record data.
1. Do not write to an SD card if the battery power is low. Low power
could affect writing accuracy.
2. Do not remove an SD card while read/write is in progress.
3. The SD card is designed so that it can be inserted only one way. Do
not try to force the card into the slot.
4. Do not leave an SD card partially inserted in the slot. Press the SD
card until you hear it click into place.
5. Do not twist or bend SD cards.
6. Do not expose SD cards to liquids or store in humid areas or lay
media close to containers of liquid.
7. After using an SD card, return it to its case.
8. Do not touch the metal part or expose it to liquids or let it get dirty.

Memory expansion

This computer is equipped with two memory module sockets beneath the
keyboard. You can increase the amount of RAM by installing an additional
memory or replacing default memories with additional memories. This
section describes how to install and remove a memory module.
Place a mat beneath the computer to prevent making a scratch on the lid
when replacing the memory module. Avoid the mat that generates static
electricity.
Use only memory modules approved by TOSHIBA.
Do not try to install or remove a memory module under the following
conditions. You can damage the computer and the module. Also, data will
be lost.
The computer is turned on.
The computer was shut down using the Stand by mode or Hibernation
mode.
Wake-up on LAN is enabled.
Use a point size 0 Phillips screwdriver to remove and fasten screws. Use
of an incorrect screwdriver can damage the screw heads.
Portégé M100
Optional Devices
8-6