Use; Operation; Temperature Regulation - Zanussi ZO 32 N Instruction Booklet

USE

GB

Operation

Insert the plug into the wall socket.
Open the refrigerator door and turn the thermostat
knob, clockwise, beyond the «O» (STOP) position.
The appliance will start to operate.

Temperature regulation

The temperature is automatically regulated and can be
increased to achieve a higher temperature (warmer)
by rotating the thermostat knob toward lower settings
or reduced (colder) rotating the knob towards higher
settings.
However, the exact setting should be chosen keeping
in mind that the temperature inside the refrigerator
depends on:
room temperature;
how often the door is opened;
the quantity of food stored;
location of appliance.
A medium setting is generally the most suitable.
To stop operation, simply turn the thermostat knob to
position «O».
Important
If the ambient temperature is high or the
appliance is fully loaded, and the appliance is set to
the lowest temperatures, it may run continuously
causing frost to form on the rear wall. In this case
the dial must be set to a higher temperature to
allow automatic defrosting and therefore reduced
energy consumption.
53