Electricity Supply - Zanussi ZOB 511 User Information

28 electrolux
Grill heating element
This model has been fitted with a hinged grill ele-
ment to make the roof of the oven especially easy
to clean.
Before proceeding ensure the oven
is cool and disconnected from the

electricity supply.

1) Undo the screw fastening the grill element (see
Fig). When carrying out this operation for the
first time, we recommend using a screwdriver.
2) Then gently pull the grill downwards to allow
access to the oven roof (see Fig).
3) Clean the oven roof with a suitable cleaner
and wipe dry before returning the hinged grill
element to its original position.
4) Carefully push the grill element up into its origi-
nal position and re-tighten the retaining nut.
Ensure the retaining nut on the grill
element is properly tightened so that
it does not fall down when in use.
Telescopic pull-out rails
The side rails with telescopic pull-out rails can be
completely removed for cleaning.
Removal
Take hold of the side rails on one side of the oven and
undo the knurled nut at the front. Lift the side rails at the
back in order to unhook them (Fig. 28).
Do the same thing on the other side of the oven.
Cleaning
Clean the two sets of side rails with telescopic rails on
the outside only with commercially available
detergents.
The telescopic rails must not be cleaned in the
dishwasher.
Attention, the rollers must not be greased.
Insertion
After cleaning, first insert the dry side rails with the hook
into the hole at the back, then fasten at the front with the
knurled nut.
28