Restricting Polling Machines (Polling Security) - Sharp AR-FX13 Operation Manual

RESTRICTING POLLING MACHINES (POLLING SECURITY)

If you wish to allow only specified fax machines to poll your fax machine, enable polling security and program the fax
numbers of the machines that are to be allowed to poll your machine. When this is done, polling will take place when
the fax number of the polling machine matches one of the fax numbers that have been programmed in your machine.
Up to 10 passcode numbers (fax numbers of machines that are allowed to poll your machine) can be programmed.
To enable polling security and program passcode numbers, see "Programming/deleting passcode numbers:" on page 78.
[Preparation]
Polling fax
Enter the fax number
for your fax machine
Enter the fax number of
fax machines you want
to allow to poll your fax
machine
Fax being
polled
[Preparation]
Follow these steps to enable polling security:
1
Press the [MENU] key.
2
Press the [ ] key (
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
Selection
"4:USER PROGRAM"
3
Press the [ ] key (
until "12:SECURITY SELECT"
appears, and then press the [ENTER]
key.
Selection
"12:SECURITY SELECT"
[When polling]
Select polling or serial polling
polling
Entered fax
number
These two numbers are compared
) or [ ] key ( )
) or [ ] key ( )
numbers
Permitted fax
match
number
4
Press the [ ] key (
to select "1:ON".
Selection
"1:ON"
To turn off polling security, select "2:OFF".
5
Press the [ENTER] key.
6
Press the [MENU] key.
SPECIAL FUNCTIONS
beep
Fax is received
sending
polling allowed
) or [ ] key ( )
Press the [MENU] key to
exit.
77
5