Table of Contents
Advertisement
11
21
22
[SPEAKER] key
15
Press this key to begin manual dialing. (To close
the line, press the [SPEAKER] key again.)
LINE STATUS indicator
16
Lit when sending/receiving faxes, blinking when
receiving data.
[MODE SELECT] key / Mode indicators
17
Press this key to select the mode. The indicator of
the selected mode lights (copy, printer, scanner,
fax mode indicators).
RSPF indicator (Option)
18
This lights up when an original is placed in the
RSPF.
Error indicator
19
This lights steadily or blinks when a paper misfeed
or other error occurs.
Tray location indicator
20
Indicates the selected paper tray. The indicator
blinks when the tray is out of paper or is not closed.
[MENU] key
21
Press this key to configure a user program.
[
] key (
), [
] key (
22
Press the [
] key (
select an item in a function setting menu.
Press the [ENTER] key to enter a selection.
23
24
25
), [ENTER] key
) or [
] key (
) to
12
26
27
28
[ ] key
23
Press this key to enter symbols during a name
storing procedure.
Press the " " key to change from pulse dialing to
tone dialing mode.
Numeric keys
24
Press these keys to dial numbers, and enter
numbers and letters during number/name storing
procedures.
[#] key
25
Press this key to enter symbols during a name
storing procedure. The [#] key scrolls through
symbols in the opposite direction of the [ ] key.
When dialing, press this key after you are finished
scanning originals into memory from the document
glass.
[CLEAR ALL] key (
26
This returns all functions to the default settings.
When pressed in a setting menu, this returns the
settings and display to the initial state.
[START] key (
)/ indicator
27
Used for the following:
• To begin sending a fax.
• Reading an original into memory from the
document glass.
• Manually receiving a fax.
• Entering and setting information.
Power save indicator
28
This lights up when the power save function is
activated.
INITIAL SETTINGS
)
15
2
Advertisement
Table of Contents
Troubleshooting
