Unpacking And Assembly - Golden Technologies Alero GP-50 User Manual

Unpacking & Assembly
Unpacking
After removing your Alero GP-50 power chair from the carton please check that
you have been supplied with the following main parts as standard specification.
1. The main frame with Motors /gearboxes and front castors attached
2. Foot rigging with swing away leg rests
3. Rear drive wheels 12 1/2" x 2 1/4" rear wheel with foam filled tires
4. Batteries boxes
a battery (Optional )
5. Batteries Rechargeable sealed lead-acid battery, 12V34AH and/or
smaller. (Optional )
6. Battery Tray
7. Battery Charger 5 amp
8. Controller
9. Motors: 24V DC permanent magnet commutator motors
Assembly
Please assemble the main parts mentioned as per the following procedure and
check the assembly for normal operation.
1. Mount the swing away leg rests as shown in Fig 8.
2. Drive wheels, motor / gearbox assemblies are pre-installed as shown in
Fig 12.
two pieces, for 28AH~34AH batteries use one box for
Foldable tray
Dynamic DL 50
Alero user's manual page 6 of 33