Assembly And Folding Your Cricket - Golden Technologies Cricket GP302 Owner's Manual

Rear wheel drive power wheel chair
Table of Contents

Advertisement

VI. ASSEMBLY AND FOLDING YOUR
The
feel capable of safely lifting that much weight.
To Assemble:
With the unit in the folded standing position, follow the steps below.
1. With one hand on the backrest push handle and the other hand on the seat tube, pull in op-
posite directions to unfold the power wheelchair. Note: An audible "click" indicates the latch has
engaged and is now in the locked position. See figure 2.
Pinch points exist, so your hand placement is critical. Injury can occur if you do
not follow the hand placement recommendation in step 1.
Figure 2
2. Remove the zip tie and block from the latch on the
battery pack shown in figure 3.
3. Engage the battery latch and push the battery pack
into position and release the latch, see figure 4. Note:
An audible "click" indicates the latch has engaged and
is now in the locked position.
4. Loosen the armrest knob, insert the joystick and adjust to a length comfortable to you, then
tighten the knob to secure the joystick. (Note: The joystick may be installed on the left or right
arm according to your preference). See figure 5.
Be sure the joystick cable is
securely attached to the unit and that the cable is
not able to trail on the ground or become
entangled on any surrounding objects while the
unit is in use.
weighs approximately 38 pounds. Please ask for help if you do not
TM
Cricket
Figure 5
13
13
TM
Cricket
Figure 3
Figure 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents