Tire Maintenance - Golden Technologies Alero GP-50 User Manual

Tires
Front wheels : GP-50 come with 7.8" x 2" flat free tires
Rear wheels : GP-50 come with 12-1/2" x 2-1/4" flat free tires
Follow these easy steps for a quick and safe repair:
1. Use a ratchet and socket to remove the drive wheel screw from the center
hub of the wheel. See Fig 41.
2. Pull the wheel off of the axle.
3. Separate the tire from the rim.
4. Remove the tire and replace it with a new tire.
5. Slide the wheel back onto the shaft.
6. Install the drive wheel nut into the center hub and tighten.
Fig 41 Rear drive wheel Screw removal
Rear wheel fixing screw must be tightened by 1000 KGF.CM torsion.
Tires are solid, flat free tires
Alero user's manual page 23 of 33