Answering A Video Call; In Call Menu (Video Call) - Sharp 903SH User Manual

Answering a Video Call

When an incoming call is detected, the phone rings.
Press D to answer the call with video or press [Options] and
1.
select "Hide Picture" to answer with voice only.
Tip
• When the call ends, the call cost is displayed.
• If you have subscribed to the Calling Line Identification (CLI) service
and the caller's network sends the number, the caller's number is
displayed on the screen. If the caller's name and number are saved
in the Contacts List, the caller's name is displayed on the screen.
Rejecting an Incoming Call
Press F while the phone is ringing to reject a call you do not
1.
wish to answer.
Letting the Caller Know You are Unavailable
1.
Press [Busy] while the phone is ringing to send a busy tone to
the caller of an incoming call letting them know that you
cannot answer the call.

In Call Menu (Video Call)

Muting the Microphone
1.
During a video call, press [Mute].
To use the microphone again, press [Unmute].
Swapping Images
You can swap images between the main and sub screens.
1.
During a video call, press [Options] and select "Switch
Images".
26 Voice Call/Video Call Functions
Tip
• You can also swap images between the main and sub screens by
pressing during a video call.
Changing the Image of Yourself
1.
During a video call, press [Options] and select "Camera
Picture".
2.
Select "Internal Camera", "External Camera" or "Alternative
Image".
"Internal Camera":
"External Camera":
"Alternative Image":
Tip
• You can also switch the image shown to the caller by pressing c
or d during a video call.
The image through the sub camera is
displayed and sent to the caller.
The image through the camera is
displayed and sent to the caller.
The camera is turned off and the
image selected in "Alternative Image"
of "Video Call Settings" is used.