Sharp 903SH User Manual page 11

17. #/Silent Key:
R
18. Microphone
19. Camera (External Camera)
20. Battery Cover
21. Built-in Aerial:
22. Mobile Light:
23. Infrared Port:
24. Stereo Speakers
25. Small Light:
26. Side Keys (V/W):
10 Getting Started
Displays symbol screen on the text
entry screen.
Press and hold to switch languages
on the text entry screen.
Turns the flash/auxiliary light on or off
in camera mode.
Press and hold in standby to switch
Profiles settings between the mode
most recently activated and Silent
mode.
Warning: Do not cover the top of the
phone with your hand when in use as
this may interfere with the
performance of the built-in aerial.
Used as a flash or an auxiliary light in
camera mode.
Sends and receives data via infrared.
Used for the battery charge indicator,
Event Light and Status Light.
(These two keys work in reverse with
the viewer position of the display.)
Moves the highlight up or down.
Press in standby or during a call to
increase or decrease the earpiece
volume.
27. Menu Key:
X
28. Camera Key:
Y
29. Cancel Key:
Z
Executes the function in the lower left
of the screen in the viewer position of
the display.
Displays the Main menu when
pressed in standby, then executes a
highlighted function in the viewer
position of the display.
Press and hold to activate the
camera.
Press during an incoming call alert to
answer the call in the viewer position
of the display.
Executes the function in the lower
right of the screen in the viewer
position of the display.
Press and hold in standby to turn the
mobile light on. You can change the
light colours by pressing V or W
when the mobile light is on.
Press and hold to reject an incoming
call.
Press during an incoming call alert to
send a busy tone to the caller in the
viewer position of the display.
Press to end the call in the viewer
position of the display.