Settings; Profiles - Sharp 903SH User Manual

Settings

(M 12)

Profiles

(M 12-1)
The ringtone, sound, vibration and light settings can be customised
for each profile according to your environment.
There are 6 profiles: "Normal", "Meeting", "Activity", "Car",
"Headset" and "Silent".
Activating a Profile
→
"Settings" "Profiles"
1.
Select the desired profile.
Note
• When a profile is set, the corresponding indicator described on
page 17 is displayed in standby.
Tip
• In standby, press and hold R to switch Profiles between Silent
mode and the profile most recently activated.
Resetting Profile Settings
→
"Settings" "Profiles"
1.
Highlight the profile you wish to reset.
2.
Press [Options] and select "Set to Default".
3.
Enter your handset code.
The default handset code is "9999". For details on changing the
handset code, see "Changing the Handset Code" on page 108.
Volume
You can adjust the volume for incoming voice calls, SMS/MMS/Email
messages and other sounds ("General Volume") to one of six levels,
or set an increasing volume for all of these except "General Volume".
→
"Settings" "Profiles"
1.
Highlight the profile you wish to customise.
2.
Press [Options] and select "Personalise".
3.
Select "Volume".
4.
Select "For Incoming Call", "For New Message" or "General
Volume".
5. Press a (or d) to increase the ringer volume or press b (or
c) to decrease the ringer volume and then press
To select "Increasing Volume", press a (or d) at level 5.
To select "Silent", press b (or c) at level 1.
Tip
• You can select from two levels or an increasing volume, when
selecting the "Silent" profile.
.
Settings 93