Inserting The Memory Card; Removing The Memory Card - Sharp 903SH User Manual

Low Battery during Use
When the battery is running low, an alarm will sound and "
displayed on the main display.
If you are using your phone and you hear the low battery alarm, attach
your charger as soon as possible. The phone may not be able to
continue normal operation if you continue to use it.
Battery Indicators

Inserting the Memory Card

1.
Turn off the phone.
2.
Open the memory card slot cover and insert the card with the
label side facing up.
3.
Insert the memory card all the way in until it clicks.
4.
Close the cover.
14 Getting Started
Charge Level
Sufficiently charged
Charging recommended
Charging required
Empty
Note
" is • Make sure that the phone is turned off before inserting the memory
card.
• Be sure to insert the card in the correct direction and orientation.
• Do not open the memory card cover while the memory card is
being formatted or written to. The card may be damaged beyond
use.
• Keep all memory cards out of the reach of small children.
Tip
• You see the following indicators when the memory card is in use:
: Appears when the card is inserted.
: Appears when the card is damaged or unusable.
: Appears when the card is being written or read.
: Appears when the card is being formatted.

Removing the Memory Card

1.
Open the memory card slot cover and slightly push the card so
it pops out. Remove the card and close the cover.
Note
• Make sure that the phone is turned off before removing the
memory card.
• Do not remove the memory card while the memory card is being
formatted or written to.