Table of Contents
Advertisement
Important notes
Detaching the oven door
If splashes are still visible even after repeated use,
proceed as follows:
First clean the enamel surfaces in the oven. Then
select 3D hot air T or top and bottom heating t.
Heat up the empty oven for approximately 2 hours at
maximum temperature.
The ceramic coating is regenerated. Brownish or
whitish residues can be removed with water and a
soft sponge.
Light discolouration of the coating does not affect
automatic self cleaning.
Never use abrasive detergent. You will scratch or
destroy the highly porous coating.
Never clean the rear panel with oven cleaner.
If oven cleaner accidentally gets onto the rear panel,
remove it immediately with a sponge and plenty of
water.
The oven door can be easily detached.
1.
Open the oven door fully.
2.
Move the two locking levers on the left and
right hand sides.
3.
Half close the oven door.
With both hands, grip the bottom of the door on
the left and right hand sides.
Close the door a little more and pull it out.
After cleaning, re install the oven door, following the
instructions in reverse order.
41
Advertisement
Table of Contents
