Table of Contents
Advertisement
SETTINGS
CHANNEL
Auto tuning
The auto tuning function will search for and save all
available free-to-air TV channels. After confirming
your settings (the default will be set for Australia),
the process will automatically begin. The number of
searched channels will be shown on the screen.
DTV manual tuning
Select the broadcast channel frequency manually to
tune digital TV channels.
ATV manual tuning
Select the broadcast channel frequency manually to
tune analog TV channels (ATV is no longer supported in Australia).
Dynamic rescan
Toggle dynamic rescan function on/off. When on, the channel list will
automatically update when changes are detected.
Program edit
Adjust, delete, mark as favourite, or set a channel to be skipped in the
sequence.
Signal information
Available in DTV mode only, this will display the current signal information.
PICTURE
Picture mode
Choose from the following selection of presets, or
select 'User' mode to configure your own custom
settings.
• Standard: Default picture settings
• Vivid: Brighter colours and richer blacks
• Sports: Optimised for viewing live sports content in
brightly-lit environments
• Movie: Optimised for film viewing
• Home: Optimised for viewing content in a home
environment
Channel
If User is selected as the Picture mode, the following options are adjustable:
• Contrast: Adjust the colour depth level in the picture
Auto Tuning
• Brightness: Adjust brightness in the picture
DTV Manual Tuning
• Colour: Adjust the colour saturation level in the picture
ATV Manual Tuning
• Sharpness: Object edges are enhanced for picture detail
Dynamic Rescan
On
• Tint: Adjust the hue of the picture (only available for NTSC signals)
Program Edit
• Backlight: To control the brightness of the screen itself, adjust the panel backlight
Signal Information
brightness.
Aspect ratio
You can select the picture size which best corresponds to your viewing
requirements. Sizes may differ between input sources.
Advanced settings
For more technical adjustments, press Navigational button to access the
advanced settings options.
SDR to HDR
Conversion from standard dynamic range to high dynamic range.
NR (noise reduction)
Reduces screen noise without compromising video quality. Select from off, low,
middle, or high.
MPEG NR
Reduces MPEG noise to provide improved picture quality. Select from off, low,
Picture
middle, or high.
Picture Mode
User
Dynamic contrast
Automatically adjusts the contrast to the optimal level based on image
• Contrast
52
brightness.
• Brightness
52
• Colour
40
Film mode
• Sharpness
6
Automatically senses and processes film signals from all sources and adjusts
the picture for optimum quality.
• Tint
0
• Backlight
63
OverScan
Aspect ratio
16 : 9
The picture reproduction rate is adjusted (only DTV/HDMI modes).
Advance Settings
...
Picture reset
Reset all picture settings to the factory defaults.
11
Advertisement
Table of Contents
