Table of Contents
Advertisement
3. Remove the computer cover. See "Removing the computer cover" on page 73.
4. Remove the hard disk drive. See "Replacing the hard disk drive" on page 74.
5. Remove the wall mount. See "Removing or reinstalling the wall mount" on page 82.
6. Locate the heat sink on the system board. See "FRU locations" on page 69.
7. Remove the fan duct by pressing the two tabs
Figure 20. Removing the fan duct
8. Follow the sequence on the heat sink to loose the four screws that secure the heat sink to the system
board.
Note: Carefully loose the four screws from the system board to avoid any possible damage to the
system board. The four screws cannot be removed from the heat sink.
88
ThinkCentre Hardware Maintenance Manual
1
inward, and then pivoting the fan duct upward.
Advertisement
Table of Contents
