8. Note the routing of the system fan cable, and then disconnect the system fan cable from the system
board. Lift the system fan off the main bracket.
9. Connect the new system fan cable to the system board. Position the new system fan on the main
bracket and align the screw holes in the new system fan with those in the main bracket.
10. Install the three screws that secure the system fan to the main bracket.
11. Reinstall the wall mount. See "Removing or reinstalling the wall mount" on page 82.
12. Reinstall the hard disk drive. See "Replacing the hard disk drive" on page 74.
13. Go to "Completing the parts replacement" on page 113.
.
Chapter 8
Replacing FRUs
85