Advanced Operations; Transmit Power; Calling Alert; Key Lock - Kenwood TK-2317 Instruction Manual

TrANSMIT PowEr

Each channel is programmed with either high or low transmit
power. On high transmit power channels, press the key
programmed as [Low Transmit Power] to change the transmit
power to low power (you cannot change low transmit power
channels to use high power).
• The indicator appears while using low transmit power.

CAllING AlErT

The Calling Alert tone alerts party members that you are
making a call. To make a call:
1 Briefly press and hold the key programmed as
[Calling Alert].
• Release the key to end the tone transmission.
2 Press the PTT switch and speak into the microphone in
your normal speaking voice.

KEy loCK

Press and hold the key programmed as [Key Lock] for 2
seconds to lock the transceiver keys. Press and hold the [Key
Lock] key again to unlock the keys.
• LOCKED
"
are locked.
Note: You can still use the following keys and functions when Key
Lock is activated: [Emergency], [Lamp], [Monitor], [Monitor
Momentary], [Squelch Off], [Squelch Off Momentary], [Key
Lock], PTT.
SEND THE GPS DATA
Press this key when the GPS unit has been installed to send
your positioning data to the base station.

ADvANCED oPErATIoNS

appears when a key is pressed while the keys
"
2