Talk Around - Kenwood TK-2317 Instruction Manual

2 To exit Emergency mode, press and hold the [Emergency]
key again.
• If the Emergency mode completes the preset number of cycles,
Emergency mode will automatically end and the transceiver
will return to normal.
■ Lone Worker Mode
Lone Worker Mode is a safety feature built into the
transceiver. If the transceiver is not operated for a
pre-programmed period of time, the transceiver will emit a
tone and automatically enter Emergency operation.
Press and hold the key programmed as [Lone Worker] for
2 seconds to toggle the Lone Worker function ON or OFF.

TALK AROUND

During interruptions in service (such as a power failure), you
can continue to communicate by using the Talk Around feature.
Talk Around allows you to communicate directly with other
transceivers without the use of a repeater, as long they are not
too far away or there are no geographical obstacles in the way.
Press the key programmed as [Talk Around] to toggle the
Talk Around function ON or OFF.
• The indicator appears while Talk Around is activated.
25