Flue Assembly; Control Panel - Zanussi ZHC 64 Installation, Use And Maintenance Handbook

Hide thumbs Also See for ZHC 64:

Table of Contents

Upper exhaust flue

• Slightly widen the two sides of the upper flue

and hook them behind the brackets 7.2.1,

making sure that they are well seated.

• Secure the sides to the brackets using the 4

screws 12c (2,9 x 9,5) supplied.

• Make sure that the outlet of the extensions pieces

is aligned with the chimney outlets.

Lower exhaust flue

• Slightly widen the two sides of the flue and hook

them between the upper flue and the wall,

making sure that they are well seated.

• Fix the lower part laterally to the hood body

using the 2 screws 12c (2,9 x 9,5) supplied.

USE

Light

Switches the lighting system on and off.

Led

Motor running led.

Motor

Switches the extractor motor on and off at low speed. Used to provide a contin-

uos and silent air change in the presence of light cooking vapours.

Speed

Medium speed, suitable for most operating conditions given the optimum treated

air flox/noise level ratio.

Intensive

Maximum speed, used for eliminating the highest cooking vapour emission,

including long periods.

Flue assembly

2.1

2.2

7.2.1

12c

Table of Contents